Cart 
Order Tracking
50mA Ammeter Analog Amp Panel Meter Current for CO2 Laser Engraving Cutting Machine
Item Code: CS-LASER-50A
Specification: Model: 85C1 Test Range: 0~50mA Accuracy: Class 2.5 Weight: 112g Size: 64 x 56 x 52mm Work temperature: -40 ~ +70°C Mounting: Vertical Mounting
Ships to United States
Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100
EFR F4, ZS1450 CO2 Laser Tubes Power Supply / Power Source with PFC Function, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple port control, and
Ships to United States
400W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY400A
sorts of steel as used for making molds, beryllium copper, stainless steel, aluminum, platinum, K gold, silver and titanium and different metals and alloys. • Welding point’s diameter only 0.1-3.0mm, with high precision and accuracy; • Wavelength of YAG Laser is 1064nm which
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 25mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-25
Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (25mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 17mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-17
Description: This Open Ended Single-sided Timing Belt for CO2 Laser Engraver (17mm Width, Pitch 3mm) using Japan imported high quality synthetic neoprene and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 2388mm Length, Pitch 3mm
Item Code: CS-BLT-2388-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 2388mm Sleeve Width: 450mm Teeth No.: 796mm
Ships to United States
US Stock, Ving 300W 2 Optical Path Laser Welder for Fine Metal Channel Letter Making
Item Code: LWM-WF300HZ-S-US
is within 1.2mm. (For welding aluminum, You’d better choose 400W laser welder) This Laser Welder includes four parts: laser beam+ power box, cooling system, marble table Advantages: Red light spot fast positioning, CCD display, microscope optional. Fast working speed; professional jig ensures
Ships to United States
500W Optical Fiber Transmission Handheld Laser Welding Machine as Used for Making Molds
Item Code: LWM-CY-WF500
Features: 1. Handheld laser welding joint is more convenient and quick to use. 2. Spot energy distribution is uniform, with the best spot required for welding characteristics. 3. Adapt to various complex welds, spot welding of various devices, and seam welding of thin plate within 2mm. 4. Gold
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm Length, Pitch 3mm
Item Code: CS-BLT-1800-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 1800mm Sleeve Width: 450mm Teeth No.: 600mm
Ships to United States
US Stock 49" x 98" (1250mm x 2500mm) Laser Cutting Machine
Item Code: LCM-EGL-G1325-US
processing, small parts and parts without a supporting strip under them will drop into the collection bay to avoid interacting with the laser. Users can retrieve them simply by pulling out the drawer. High Precision Ball Screw Motion System Unlike a low rigidity belt motion system, the G-1325 is equipped
Ships to United States
300W General Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300B
1.1 Working principle The working principle of this laser machine is to take the advantages of the laser deposit welding and uses the technology of collective and spot welding with high heat of laser. It can effectively treat the welding defects of tiny parts and conduct repair work. This technical
Ships to United States
All-In-One Design 30W Fiber Laser Marking Machine, Free Computer with Pre-installed EZCAD Software
Item Code: LMM-ED-F30
All-In-One Design 30W Fiber Laser Marking Machine, Free Computer with Pre-installed EZCAD Software Includes computer with Pre-install software The ED-F30 has an all-in-one design, with fiber laser, galvanometer, Accessory axis, control system, industrial PC included and integrated, and provides a
Ships to United States
CALCA 300W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY300A
sorts of steel as used for making molds, beryllium copper, stainless steel, aluminum, platinum, K gold, silver and titanium and different metals and alloys. • Welding point’s diameter only 0.1-3.0mm, with high precision and accuracy; • Wavelength of YAG Laser is 1064nm
Ships to United States
Motorized Up and Down Patform for LEM-RS-M500 Series Laser Engraver
Item Code: CS-LM-MUD01
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-QD2-6040
Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System This machine can transfer patterns and texts which are printed by sublimating ink or solvent ink onto fabrics like cotton, linen, chemical fabric, and nylon and ceramics through heat transfer
Ships to United States
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines
Item Code: LCM-KH-750-100W
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines TThis Laser Engraver is equipped with EFR 100W CO2 Laser Tube. It is used to engrave on wood, bamboo, crystal, leather, rubber, marble, ceramics and glass and etc. It supports multiple graphic formats, such as HPGL, BMP
Ships to United States
Silicone Ring Kit Seal Washer Gasket for Laser Focus Lens Dia.19mm / 20mm
Item Code: CS-TL-01
Description: This silicone ring kit seal washer gasket used for laser focus lens Dia.19mm / 20mm, protect the laser focus lens against slip and scratch.
Ships to United States
Network Cable for Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System
Item Code: CS-AWC-NC
Network Cable for Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System To be used with: Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System
Ships to United States
20W MOPA M6 Fiber Laser Marking Machine Engraving Aluminum Black Color Marking
Item Code: LMM-MAX-MOPA
Machine mainly consists of four parts: fiber laser, galvanometer scanning system, computer control system and the worktable. Name Origin (brand) Remarks Optical maser MAX Long service life, high reliability, fine beam quality Galvo mirror SINO
Ships to United States
F-theta Lens Adjust Mount M79-M85 For Laser Marking Machine
Item Code: CS-LENS-1064-AM
F-theta Lens Adjust Mount M79-M85 For Laser Marking Machine Features: 1. This F-theta Lens Adjust Mount is made of Aluminum, fine texture with good surface treatment 2. Durable to use, Long service life 3. Easy to install and remove 4. Application: Solve the problem of size inconsistency between F
Ships to United States
