Cart 
Order Tracking
Semi-Automatic Business Card Cutter (85 x 55mm)
Item Code: CS-SSB-003
Description: This semi-automatic business card cutter is used for cutting business card. It’s durable for the steel blade and the blade could be milled by itself to ensure it will be sharp. This cutter cut business card and photo without rough edges because of its reasonable mechanical structure. This business card cutter can also cut laminated card or photo. It’s with multi-adjustment with nice out appearance and the cutter is very smart that's easy to take and operate. Warm Tips: 1. Please make sure the cutter is power off and unplug the power plug first when you clean the machine. 2. Test it before using if the business card cutter does not work for a long time. 3. Make sure the business card is aligned with the blade and tighten the screw of the cutter. 4. Don't put your hands under the blade when the machine is running. 5. Please operate under the operation manual strictly. 1. See-through window 9. Feed tension 1 2. Housing 10. Adjustable paper feed knob 2 3. Push mark 11. Paper margin adjustment knob 4. Receptacle 12. Feed tension 2 5. Pass through No. 2 13. Adjustable paper feed knob 1 6. Switch 14. Arrow mark 2 7. Arrow mark 1 15. Warning Mark 8. Pass through No. 1 Item Semi-auto Business Card Cutter Hand Press Card Cutter Feature Automatic type, it’s easy and convenient to operate that is power saving. Manual type, it’s exhausting to operate. High Efficient 30-40pcs/minute 10-20pcs/minute Durable It adopts aluminum alloy blade which is durable with long life-span. Short life time 1. Prepare the business card cutter and then plug the power plug. 2. Insert the card paper along the fixed feed tesion1 to the feed table in pass through No.2. 3. Adjust the adjustable paper feed knob 1 beneath the housing to ensure the center line in your content must be centered to the arriow mark 1. 4. Adjust paper margin adjustable knob on the left side to lock the card paper in the proper position, then switch on to bring out the semi finished cards and switch off when all first pass completed. 5. Insert the semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1. 6. Semi finished content must be put along the stop knob on the right side closely by adjustment of adjustable paper feed knob 2 and make sure the arrow mark 2 precisely points at the third broken line in the card paper through see-through window. 7. Power on again followed by pressing “the push mark” with two thumbs forward evenly to see semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1 from see-through window then power off when all finished. 8. Open the lid to clear wastepaper or the content stuck in the blade after all works completed but be sure the machine is powered off. The business card cutter is widely used for cutting business card, photo and picture card, etc. Quality Report:
Ships to United States
1000pcs 58mm Plastic Bottle Opener with Magnets
Item Code: CS-PQ-58P
Description: Size: 2-3/4" 58mm Upper-shell: Chrome Bottom-shell: ABS mylar disc The component contains: Upper-shell, Down-shell, Film Qty/CTN: 1000pcs The item contains: Upper-shell: 1000pcs Down-shell: 1000pcs Film: 1000pcs
Ships to United States
1000pcs 58mm Mirror Button with Plastic Ring
Item Code: CS-JZ-58
Components: Complete set includes: 1 Shell, 1 Mylar, 1 Plastic ring, 1 Mirror back. Quality: 1000 sets per package. Shell size: 2.28" (58mm) Mylar size: 68mm
Ships to United States
1000pcs 75mm Mirror Button with Plastic Ring
Item Code: CS-JZ-75P
Description: Round size: 3" (75mm) Upper-shell: Chrome Bottom-shell: ABS mylar disc The component contains: Upper-shell, Down-shell, Film, Pin Qty/CTN: 1000pcs The item contains: Upper-shell: 1000pcs Down-shell ABS: 1000pcs Film: 1000pcs Pin: 1000pcs
Ships to United States
Heavy Duty ID Card Die Cutter (88mm x 60mm)
Item Code: CS-D-009
The ID card cutter is easy and convenient to operate with beautiful looking and have no rough edges on the finished products. ID card cutter is a special tool for cutting ID card, business card, paper card or certificate. There are lots of types and specifications which can meet customers'demands. This paper card cutter is a special tool for cutting paper card. And the paper card is 200gsm or 250gsm. Notes: The price quoted is based on the mini order quantity, and it will be add 10% additionally if your order is less than the MOQ.
Ships to United States
430mm Manual Guillotine Paper Cutter
Item Code: SIC-HY-430M
Description: Specially design for office use, copy centers, copy shops, in-house printing and small print shops. With a cutting paper length up to A3 size (16.9") (430mm). Advantages: . Easy blade change. . Adjustable blade depth. . High quality steel blade. . Back gauge spindle guided. . Manual fast flick action clamp. . Sidelines with scale measurements. . Blade change device with cover cutting edge. . Safety guard blade lock, located on the front table. . Cutting length for paper size up to A3 (16.9") or (430mm). . Fine measurement adjustment with calibrated scale on the back gauge handle.
Ships to United States
220x180x3mm Blank Sublimation Mouse Pads DIY Mouse Mats
Item Code: HTMO-MP3-10PC
Description: • Material: Black natural rubber with 180g white polyester fabric on top • Size: 220X180X3mm • Printing Technology: Dye sublimation, heat transfering and screen printing • Recommended Heating Time & Temperature: Approximately 185°C for 50 seconds with high pressure • Package: 10pcs/carton Application: You can customize logos, images on the mouse pads for promotion or as gifts.
Ships to United States
13*3mm Plastic Hand Hold ID Card PVC Card Flat Slot Hole Punch
Item Code: CS-A-008
Description: This flat punch is used to punch certificate card, pass certificate, etc. It is convenient and applicable easily. The hole it punches by hand is of standard without coarse edges. It is suitable for suspension nip.
Ships to United States
USA CVD ZnSe Focus Lens Dia. 12mm/0.47" FL 2" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-ZM12
Description: Up for your bid is a high quality NEW ZnSe Plano - convex lens.The lens is 0.47" (12mm) in diameter, and focal lengths is 2" (50.8mm). It is coated for CO2 lasers at 10.6um wavelength.It is coated for CO2 lasers at 10.6um wavelength.This would be a great lens for a co2 engraver or laser cutter, to focus the beam into a tight spot. Used for:
Ships to United States
79" x 157" 2040 High Precision AD CNC Router, with 2.2KW Chinese Spindle and Alu Slot System
Item Code: CNCR-CP-2040Y
CNCR-CP-Y series engraving machine, is released for the sign advertising industry with a high performance / cost ratio. It has a new look, fast speed and high precision. It comes with DSC control system, HD LCD screen, and friendly interface. Double Y axis engraving machine, the latest model, is accurate as screw machines and fast as rack and pinion engraving machines. Main Configuration Information: Engraving Area: 2000mm x 4000mm (79" x 157") Height of Gantry Lifting: 110mm (4.3") Maximum Travel Speed: 25000mm (984") / min Spindle: 2.2KW Chinese air cooled 10 pcs engraving tools Aluminum alloy working table, circular guideway, Leadshine drivers 3.5" DSC-931 Color screen controller, double Y axis, stepper motor 3.5'' DSC-931 Color screen controller With digital-to-analog conversion technology and DSC control system, data processing is much faster. There is USB 2.0 and Ethernet port, also large flash memory inside. Document transmission and download will be easy with them. Remote control handle Chinese air cooled spindle, 24000rpm rate Double Y axis, double driving engraving machine, is accurate as screw machines and fast as rack and pinion engraving machines. Tool sensor is guaranteed working accuracy and engraving quality. Electrical cabinet adopts high quality accessories, long using life. • This series engraving machine has “Cutting at angle” function with DSC control system. “Cutting at angle” can make less chance of work piece coming loose and no trace marks. (When the tool comes to the corner, but not to the bottom, workpiese come loose quite often). More details of “Cutting at angle” function operation, please see software manual. Applications Billboards, dual color ABS boards, miniature models, Plexiglas, wood articles, etc. Instruction Tool sensor is guaranteed working accuracy and engraving quality. First confirm 0 point of engraving file (make center of engraving material as 0 point or the lower right corner as 0 point), and then decide how to put the engraving material on the working table. Next fix the engraving material up and put sensor on the it, then move X, Y, Z axis by keyboard or remote to sensor, once touched, the tool will rise automatically, at the same time the machine will remember the height as default to keep precision of process. (More details please check the manual of machine control software) The nut and the clamp are used to fixing cutting tools on the spindle. The diameter of cutting tools should be corresponding to clamp's diameter. The clamps have Φ3.175, Φ4, Φ6, Φ8 models, except for special cutting tools. Installation of tool Engraving material clamping Different tools have different engraving effect. Drilling tool: Mainly used for carving characters, tiny material Milling tool: Mainly used for face milling, cutting and rough processing Knurling tool: Mainly used for special shape processing, like 3D modeling character, and special texture. Remark: Here just some types for reference, others are based on actual items. The machine must be installed on a flat ground. Pay attention to following tips: • Working temperature environment 0-40℃ • Working humidity 30-75% • Power voltage 220V + / - 10% • Machine ground wire must be installed properly to avoid short circuit and / or damage. • Machine should be installed in a roomy environment with plenty of space. It should not be installed near other machine, which may cause interference. The machine may not work correctly in such instances. • Machine should be stable on all legs. Make sure there is enough room around the machine, especially around the gantry and the controller. 1. Machine Installation - Main parts installation Includes: Z axis parts installation, controller installation, spindle installation, connection of all cable, and tool sensor installation, etc More information, please refer to the User Manual. 2. Engraving Software installation, edit the image you want to process 3. Fix the workpieces onto the working table, start to process 4. Finishing work! Product Highlights • It can work offline. New look, fast speed and high precision • It uses a high speed USB 2.0 connector and can transfer at speeds up to 12MB / second. • There is an Ethernet connector and a large internal memory, making it easy to download data. • The new digital analog converter makes it much easier to change the speed of the spindle via the controller. The controller uses DSC technology, enhancing data processing speed. • When the job mixes straight lines and arcs, it will make the output very smooth. • The new controller has the same previous functions such as cutting at an angle for smoother cuts, power failure memory of the last point, restarting the job at any line, etc. • The system has many advanced functions like ramp entry, power-off memory, restarting at any line. And also many processing modes like professional modes including Constant speed cutting, 2D mode, 3D mode, Duplicate Mode, Mirror Image Mode, Scanning Mode Drilling Mode and custom mode. Quality report:
Ships to United States
LED Light Bars SMD 5730 LED Bar,30 White LED 9.6W (500mm x 12mm) for Lightbox
Item Code: LEDB-MC-50M-5730
Narrow rigid light bars with 3-chip 5050SMD LEDs. 20 inch long non-weatherproof light bars, can be cut into 3-LED segments. 12VDC operation. LED Amount: 30 LEDs LED Type: 5730 SMD Max power: 9.6W Warranty: 2 years Quality Report: Free shipping on order over 288usd in 25 areas: Puerto Rico, Canada, France, England, America, Australia, Germany, Japan, Thailand, Belgium, Spain, Maldives, Philippines, Russia, South Korea, India, Malaysia, Singapore, Indonesia, Vietnam, Cambodia, Greek, Israel, Pakistan
Ships to United States
Office Sign Indicator (149mm x 210.5 mm)
Item Code: SIC-LQ-M6153
Description: Peculiar indoor design concept which allows you to open and close the structure, so users can change or update `the` sign according to their requirements. The structure is fabricated according to German production technology.. Applications: The product is widely used for door numbers, department signage, floor signage, product introduction, adverting release, etc.
Ships to United States
Office Sign Indicator(149mm x 52.5 mm)
Item Code: SIC-LQ-M6155
Description: Peculiar indoor design concept, which allows you to open and close the structure, so users can change or update `the` sign according to their requirements. The structure is fabricated according to German structure production technology. Application: The product is widely used for door numbers, department signage, floor signage, product introduction, adverting release, etc.
Ships to United States
Thermal Laminating Film BOPP(Glossy)-TH20
Item Code: CS-TLF1208-G-TH20
Description: Thermal Laminating Film BOPP adopts advanced producing craft and advanced technology of the composite materials. The product can solve the problems of pollution, safety and quality existed in the former materials. It has no poison or strange smell when using. No solvent is used which
Ships to United States
Thermal Laminating Film BOPP(Glossy)-TH25
Item Code: CS-TLF1213-G-TH25
Description: Thermal Laminating Film BOPP adopts advanced producing craft and advanced technology of the composite materials. The product can solve the problems of pollution, safety and quality existed in the former materials. It has no poison or strange smell when using. No solvent is used which
Ships to United States
Thermal Laminating Film BOPP(Matt)-TH27
Item Code: CS-TLF1512-M-TH27
Description: Thermal Laminating Film BOPP adopts advanced producing craft and advanced technology of the composite materials. The product can solve the problems of pollution, safety and quality existed in the former materials. It has no poison or strange smell when using. No solvent is used which
Ships to United States
Thermal Laminating Film BOPP(Glossy)-TH30
Item Code: CS-TLF1812-G-TH30
Description: Thermal Laminating Film BOPP adopts advanced producing craft and advanced technology of the composite materials. The product can solve the problems of pollution, safety and quality existed in the former materials. It has no poison or strange smell when using. No solvent is used which
Ships to United States
Thermal Laminating Film BOPP(Matt)-TH30
Item Code: CS-TLF1812-M-TH30
Description: Thermal Lamination Film BOPP adopts advanced producing craft and advanced technology of the composite materials. The product can solve the problems of pollution, safety and quality existed in the former materials. It has no poison or strange smell when using. No solvent is used which makes it more safe. It is also excellent for cementing. Besides, it is folding-resisting and press-resisting. And it has high adaptability, easy to operate, too. Need not use solvent or drying which saves more energy. Features: • Smearing latex quantity is middle. • It can stick well and prevent the paper from folding and pressing. • There is no solvent thus hard to catch fire. • When used there is no strange smell, no poisonous gas. • Meet the standard of the cleanness of food package. • The products are luster with good saturation. • There is no need to use drying process which saves 2/3 energy than traditional oily membrane. • It can be used easily. • It can stick to all kinds of paper products, paper and aluminum composite materials and paper-like substances. Application: It can be widely used in pictorial magazine, exquisite paper, colorful box, swinging signboard, and the package of medicine, cigarette and wine. Remarks: The width can be cut according to customer's requirement and the minimum order is 50kg.
Ships to United States
Thermal Laminating Film BOPP(Glossy)-TH27
Item Code: CS-TLF1512-G-TH27
Description: Thermal Laminating Film BOPP adopts advanced producing craft and advanced technology of the composite materials. The product can solve the problems of pollution, safety and quality existed in the former materials. It has no poison or strange smell when using. No solvent is used which
Ships to United States
