Cart 
Order Tracking
Co2 Fabric Laser Cutter with CCD Camera Contour Cut For Sublimation Printing Sportswear
Item Code: LCM-FLC-1610
Co2 Fabric Laser Cutter with CCD Camera Contour Cut For Sublimation Printing Sportswear This is a powerful camera laser machine for contour cutting. It is a vision cutting system for sportswear, activewear, cycling wear, swimwear, and sweatshirts with sublimation printing, which adopts CCD camera
Ships to United States
High-performance Industrial Water Cooling System 8000ET for 1500W CO2 Laser Tube
Item Code: CW-8000ENTY
Description: High-performance Industrial Water Cooling System CW-8000 offers exceptional cooling performance for sealed tube CO2 laser up to 1500W. It comes with a 210L stainless steel reservoir which has been specifically designed for process cooling applications. It allows high water flow rates
Ships to United States
High-performance Industrial Water Cooling System 8000FT for 1500W CO2 Laser Tube
Item Code: CW-8000FNTY
Tips: Cooling water additive is forbidden by express company, so we could not put it into the package.You can buy it from local. Description: High-performance Industrial Water Cooling System CW-8000 offers exceptional cooling performance for sealed tube CO2 laser up to 1500W. It comes with a 210L
Ships to United States
Industrial Water Chiller CW-6500EN for Cooling 500W RF CO2 Laser System (AC 3P 380V, 50HZ )
Item Code: CW-6500ENTY
Industrial Water Chiller CW-6500EN for Cooling 500W RF CO2 Laser Systems (AC 3P 380V, 50HZ) DESCRIPTION The Industrial Chiller CW-6500 enables the best cutting quality and speed for CO2 laser cutting machines. Highly recommended for cooling 500W RF CO2 lasers. Up to 15kW large cooling capacity
Ships to United States
Industrial Water Chiller CW-6500FN for Cooling 500W RF CO2 Laser System (AC 3P 380V, 60HZ )
Item Code: CW-6500FNTY
Industrial Water Chiller CW-6500FN for Cooling 500W RF CO2 Laser Systems (AC 3P 380V, 60HZ) DESCRIPTION The Industrial Chiller CW-6500 enables the best cutting quality and speed for CO2 laser cutting machines. Highly recommended for cooling 500W RF CO2 lasers. Up to 15kW large cooling capacity
Ships to United States
S&A CW-5202AH Industrial Water Chiller for 8KW Spindle / Welding Equipment / One 130-150W CO2 Glass Laser Tube / 2 100W CO2 Laser Tubes Cooling, AC 1P 220V, 50Hz
Item Code: CW-5202AH
Ving Brand CW-5202AH Industrial Water Chiller for 8KW Spindle, Welding Equipment or 2 100W CO2 Laser Tubes Cooling Description Our CW-5202AH is refrigeration type industrial Water Chiller of 1400W cooling capacity. It’s mainly used to have the heat generated during the laser device working
Ships to United States
CALCA Upgraded 51in x 35in 130W CO2 Laser Cutter FDA Certificate, with Auto - focus Function (Local Pick-Up)
Item Code: LCM-KH-1390-130WII-PKU-US
Marks: The Products in US Stock, this is the price only for local pick-up. Customers in Other Countries Please Click Here to Order: /products/28292/51_quot_x_35_quot 130w_co2_laser_cutter with_usb_port and electric lifting worktable and auto focus.html CALCA Upgraded 51in x 35in 130W CO2
Ships to United States
CVD ZnSe Focus Lens Dia. 20mm FL1.5 - 5" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-BL20
Features: Diameter: 0.79" (20mm) Focal Length: 1.5" (38.1mm) / 2" (50.8mm) / 2.5" (63.5mm) / 3" (76.2mm) / 4" (101.6mm) Material: CVD ZnSe This would be a great lens for a CO2 engraver or laser cutter, to focus the beam into a tight spot. We adopt the
Ships to United States
CVD ZnSe Focus Lens Dia. 19.05mm FL1.5 - 5" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-BL19
Features: Diameter: 0.75" (19.05mm) Focal Length: 1.5" (38.1mm) / 2" (50.8mm) / 2.5" (63.5mm) / 3" (76.2mm) / 4" (101.6mm) Material: CVD ZnSe This would be a great lens for a CO2 engraver or laser cutter, to focus the beam into a tight spot. We adopt
Ships to United States
USA GaAs Focus Lens Dia. 19.05mm FL 2" for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-GS12
GaAs Co2 laser Focus Lens Dia.19.05mm FL 50.8mm, Imported Materials GaAs Co2 Laser Focus Lens is 19.05mm in diameter, and focal lengths is 2" (50.8mm). The GaAs Co2 Laser Focus Lens is coated for CO2 lasers at 10.6um wavelength. This would be a great lens for a co2 engraver or laser cutter, to
Ships to United States
US Stock-DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY13-110V-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: DY13 100W Power supply for RECI W2 / W4 CO2 SealedTube Laser Engraver
Ships to United States
Original EFR ES150 Power Supply with PFC Function, for F6, F8, F10, ZS1650, ZS1850 CO2 Sealed Laser Tube
Item Code: CS-PS-ES150
EFR F6, F8, F10, ZS1650, ZS1850 CO2 Laser Tubes Power Supply / Power Source with PFC Function, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high efficiency, rapid response speed and simple
Ships to United States
Loop Rubber Timing Belt 300-3M for CO2 Laser Cutter, 15mm Width and 300mm Length, Pitch 3mm
Item Code: CS-BLT-300-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 300mm Sleeve Width: 450mm Teeth No.: 100mm
Ships to United States
CVD ZnSe Focus Lens Dia. 18mm FL 38.1mm / 50.8mm / 63.5mm for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-BL18
lens for a CO2 engraver or laser cutter, to focus the beam into a tight spot. This lens is NEW in the original FACTORY BOX and is untouched. You get an unopened box. Note: Please choose the focus length when you make an order. Features: Diameter: 0.7" (18mm) Focal Length: 1.5" (38.1mm
Ships to United States
Loop Rubber Timing Belt 384-3M for CO2 Laser Cutter, 15mm Width and 384mm Length, Pitch 3mm
Item Code: CS-BLT-384-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 384mm Sleeve Width: 450mm Teeth No.: 128mm
Ships to United States
Original RECI P12 Power Supply with Digital Display Intelligent for RECI S2 / W2 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P12
Original RECI P12 Power Supply with Digital Display Intelligent for RECI S2 / W2 CO2 Laser Tube, 90V - 250V Description: P12, intelligent protection features: Wide volt (90V-250V) input, short circuit protection, open circuit protection, with the input, the signal detection, temperature and
Ships to United States
Loop Rubber Timing Belt 327-3M for CO2 Laser Cutter, 15mm Width and 327mm Length, Pitch 3mm
Item Code: CS-BLT-327-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 327mm Sleeve Width: 450mm Teeth No.: 109mm
Ships to United States
US Stock-Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100-US
supply_with_pfc function for_f4 zs1450 co2 sealed laser tubes.html EFR F4, ZS1450 CO2 Laser Tubes Power Supply / Power Source with PFC Function, 90V-250V Description: EFR power supplies for CO2 laser tubes adopt zero-current half-bridge soft-switch circuit to ensure the equipment has advantages of high
Ships to United States
