Silica Gel Pinch Roller Wheel for Redsail Vinyl Cutter
• Width: 12mm
• Hole diameter: 3mm
• Outer diameter: 16mm
• Covered with new rubber.
• With a new bearing inside the roller.
• Please measure your old pinch roller before you purchase.
To be used with: Redsail vinyl cutter RS360C, RS450C, RS500C, RS720C, RS800C, RS1120C, RS1360C, CRS1600C, RS1780C
Note: Black and transparent colors are shipped randomly
Details:
A new high-precision bearing inside the roller

Covered with new and wear-resisting rubber


Application:

Maintenance of silica gel pinch roller wheel:
• The silica gel pinch roller wheel should be cleaned frequently, and just wipe with damp cloth is ok. If there are too much glue on the wheel-face, you can use cotton dipped alcohol to wipe.
• Don't arbitrarily adjust the pressure if without pressure gauge, uneven pressure may causing deviate mistake.
• If the deviating of paper is become worse, and cleaning is useless, you may need to replace your old roller.Please replace all old rollers at same time, the different friction coefficient of new and old roller will cause the deviating of paper.
seller assumes all responsibility for this listing
Ship from where?
 |
We have 4 overseas warehouses all over the world now including: Russia, USA, Brazil and Mexico. and We are setting up another one in Europe. Normally, we will ship your order from the nearest warehouse to you. if the stock near you is sold out, we will ship your order to you directly from china. |
Return policy
 |
Purchases can be returned under the following conditions:
1) There are quality problems after opening the package.
2) Products are different than on the order list.
3) Products are irreparably damaged during transportation.
|
Payment details
Payment method |
 |
1.Paypal (online payment)
2.Creidit card
3.Bank Transfer (T/T)
4.Western Union online/offline payment
|