Cart 
Order Tracking
2 Flute Spiral CNC Cutting Bits(SHK about 6.35mm, 8mm, 10mm, 12mm, 12.7mm)
Item Code: EC-2LX635
6.35 25 6.35 55 EC-2LX6.35 6.35 35 6.35 70 EC-2LX825 8 25 8 60 EC-2LX835 8 35 8 80 EC-2LX845 8 45 8 90 EC-2LX855 8 55 8 100 EC-2LX865 8 65 8 110 EC-2LX875 8 75 8 120 EC-2LX1025 10 25 10 60 EC-2LX1035 10 35 10 80 EC-2LX1045 10 45 10 90 EC-2LX1055 10 55 10 100 EC-2LX1235 12 35
Ships to United States
10pcs Connector for LED Strip 8mm or 10mm; 2 Clips + 1 Cable 15cm
Item Code: LED-BLT-07
8mm or 10mm Single colour LED strip power connector with 15cm cable (pack of 10) Single colour LED strip solderless power connector for 8mm or 10mm strips with 15cm cable (pack of 10) This connector is used to power up single colour LED strips without any soldering to be required. The LED strip light must be 8mm or 10mm wide in order to use this connector. In order to use that with IP rated LED strips, waterproof coating (resin) must be removed from the end of both LED strips. You can use on the top of the connection heat shrinkable tubing to maintain IP rating. Please ensure connector clips are aligned with the copper contacts of the LED Strip and notice the polarity. If connecting IP rated strips remove any gel coating from copper contacts completely. In some cases might be required to move the LED forward or backwards in order for connector contacts to be aligned properly. Then insert strip in the slot and before closing the connector cover ensure the teeth clamps will hold the circuit board of LED strip in place. If an LED chip is located near by the copper connection contacts of the strip the cover might not be able to close and you may try in such a case to use the other end of your LED strip and install the connector upside down in order to match the polarity. We do suggest using this connector for powering up to 5m of LED strip. To power longer runs a soldered connection is suggested. We still suggest soldering but those connectors are best available in the market today. After lots of testing they are the only ones that are approved to be used but still not the perfect solution.
Ships to United States
MEM 16in x 20in 2 in 1 Heat Press for DTF/DTG Curing
Item Code: HTM-THX-4050
Range: 0-999sec. Max. Temp. 500°F /260°C Heat plate size: 16in x 20in(400mm x 500mm) Dimensions(LxWxH): 33in x 18in x 23in(840mm x 450mm x 580mm) Shipping Dimensions(LxWxH): 35inx22inx25in(880mmx550mm x 640mm) Shipping Weight: 154lbs(70kg) Details:
Ships to United States
New Al Desk Label 2.4" x 4.8" (61 x 122mm)
Item Code: SIC-LQ-L6110
Description: The desk label is made of PMMA environment protected engineering plastic with distinctive aluminum base. It's a kind of new style desktop display adopting high-grade material. This product is well accepted by the public due to the combination of superb technology procession and artistics. It's elegant and widely used for office, business, negotiation, etc. Application: It's elegant and widely used for office, business, negotiation, etc.
Ships to United States
US Stock CALCA HE9 High-Elasticity Powder(2.2lbs Pack, 1kg, Fine, White)
Item Code: DTF-PDW-61105-US
) Dry Cleaning: General Drying Conditions: Naturally dry or hot air dry, take complete drying as standard Tips: The powder will be shipped by special express,so the fees is very high,recommend purchase Min 20kgs per time. Package Includes: 35.2oz / 2.2lbs (1kg) / pack (Comes with resealable zipper, it
Ships to United States
Imported Tungsten Steel Solid Carbide Long SHK 2 Flutes Ball Nose End Mills CNC Router Bits
Item Code: EC-S2QX-S11
4 12 4 75 EC-S2QX04L-B 4 16 4 100 EC-S2QX06L-A 6 18 6 75 EC-S2QX06L-B 6 24 6 100 EC-S2QX06L-C 6 36 6 150 EC-S2QX08L-A 8 20 8 75 EC-S2QX08L-B 8 25 8 100 EC-S2QX08L-C 8 40 8 150 EC-S2QX10L-B 10 25 10 100 EC-S2QX10L-C 10 40 10 150 EC-S2QX12L-B 12 30 12 100 EC
Ships to United States
US Stock, 11"x 50´ 2 Rolls Vacuum Sealer Bags for Food Magic Seal Storage
Item Code: CS-AIP-VSB-02-US
strong. Product: Vacuum Bag Type: Food Storage Bags Material: PE+PA Thickness: 0.19mm(7.9mil) Size: 28cm x 1500cm (11in × 590.5in) Package size: 29cm x 19cm x 9cm (11.4in × 7.5in × 3.5in) Gross weight: 1.8kg(3.97lb) Package Includes: 2 x 11in Vacuum Sealer Bags Application:
Ships to United States
Qomolangma 2 in 1 Automatic Cap Hat Easy Heat Press Machine with 2pcs Interchangeable Platens
Item Code: HTM-AU-CH2358
Qomolangma 2 in 1 Automatic Cap Hat Easy Heat Press Machine with 2pcs Interchangeable Platens Specifications: Item Name:Automatic Cap Heat Press Machine Usage:cap Style:2 in 1 Auto Color & Page: Multicolor Heating area:3.9in x 6.3in(100mm x 160mm),optimal area:3.2in x 5.5in(80mm x 140mm) 2pcs
Ships to United States
US Stock, MEM 16in x 20in 2 in 1 Heat Press for DTF/DTG Curing
Item Code: HTM-THX-4050-US
Range: 0-999sec. Max. Temp. 500°F /260°C Heat plate size: 16in x 20in(400mm x 500mm) Dimensions(LxWxH): 33in x 18in x 23in(840mm x 450mm x 580mm) Shipping Dimensions(LxWxH): 35inx22inx25in(880mmx550mm x 640mm) Shipping Weight: 154lbs(70kg) Details:
Ships to United States
Universal 2-Edge Carbide End Milling Cutter CNC AlCr Coating Tool
Item Code: EC-DPE2
. Specification Model CED(mm) CEL(mm) SHK(mm) OVL(mm) DPE2-01 1 3 4 50 DPE2-015 1.5 4 4 50 DPE2-02 2 6 4 50 DPE2-025 2.5 8 4 50 DPE2-03 3 8 4 50 DPE2-04 4 12 4 50 DPE2-04A 4 15 4 75 DPE2-04B 4 20 4 100 DPE2-05T 5 13 5 50 DPE2-05 5 13 6 50 DPE2-06 6 15 6 50 DPE2-06A 6 20 6 75 DPE2-06B
Ships to United States
CALCA LED dream Neon Sign, Size- 12.2 X 8.85 inches
Item Code: SIC-NEON-JX-5V-004
Features: 1.Easy to use The neon light sign with 2 pre-drilled holes & Crystal line for easy hanging. You can hang it on the wall, window or place it on the table, shelf, nightstand. the neon sign light with DC5V adapter, just mount, and plug in. Indoor use only. 2.Light up A brilliant LED neon
Ships to United States
US Stock, CALCA L6 TPU DTF Transfer Powder(2.2lbs Pack, 1kg, Fine,Low Temperature, White)
Item Code: DTF-PDW-6095-US
Includes: 35.2oz / 2.2lbs (1kg) / pack (Comes with resealable zipper, it is convenient to use and unused powder can be kept clean and dry. ) Packing Size: 8.3in x 11.8in x 3.54in (210mm x 300mm x 90mm) Gross Weight: 2.64lbs (1.2kg) Process: Displays: Storage: – Don’t store at freezing or high
Ships to United States
Oxyhydrogen Water Welder Acrylic Flame Polisher Jewelry Welder, 2.2L / min Gas Generation
Item Code: APM-SF-F13
Description: Oxyhydrogen Water Welder Acrylic Flame Polisher Jewelry Welder, 2.2L / min Gas Generation. Also known as an ‘HHO Generator’ (An oxyhydrogen torch/hydrogen torch). A oxy-gas torch burns hydrogen (the fuel) with oxygen (the oxidiser). The powerful gas-generating units produce
Ships to United States
Generic 2-line 6mm x 3.5mm Water-based White Ink Tube for DTF Printers
Item Code: DTF-PART-A-09
It's suitable for the DTF printer below: CALCA Legend A3 DTF Printer (Direct to Film Printer) with 2 Epson I3200-A1 Printheads UK Stock-CALCA Legend A3 DTF Printer (Direct to Film Printer) with 2 Epson I3200-A1 Printheads Spain Stock-CALCA Legend A3 DTF Printer (Direct to Film Printer) with 2 Epson
Ships to United States
10pcs Connector for RGB LED Strip 8mm or 10mm; 2 Clips + 1 Cable 15cm
Item Code: LED-BLT-08
8mm or 10mm RGB colour LED strip power connector with 15cm cable (pack of 10) RGB colour LED strip solderless power connector for 8mm or 10mm strips with 15cm cable (pack of 10) This connector is used to power up RGB colour LED strips without any soldering to be required. The LED strip light must be 8mm or 10mm wide in order to use this connector. In order to use that with IP rated LED strips, waterproof coating (resin) must be removed from the end of both LED strips. You can use on the top of the connection heat shrinkable tubing to maintain IP rating. Please ensure connector clips are aligned with the copper contacts of the LED Strip and notice the polarity. If connecting IP rated strips remove any gel coating from copper contacts completely. In some cases might be required to move the LED forward or backwards in order for connector contacts to be aligned properly. Then insert strip in the slot and before closing the connector cover ensure the teeth clamps will hold the circuit board of LED strip in place. If an LED chip is located near by the copper connection contacts of the strip the cover might not be able to close and you may try in such a case to use the other end of your LED strip and install the connector upside down in order to match the polarity. We do suggest using this connector for powering up to 5m of LED strip. To power longer runs a soldered connection is suggested. We still suggest soldering but those connectors are best available in the market today. After lots of testing they are the only ones that are approved to be used but still not the perfect solution.
Ships to United States
5cm (2 inch) Double Curling Guide Hemming Guide for Silicon Edge Sewing Machine
Item Code: CS-ACC-MT-DCG5
Description: With this guide ,you can make a hemming or pocket, and put rope through it. Suitable Model: Silicon Edge Sewing Machine CS-MT-KC01-2PL
Ships to United States
2 Port USB / Serial port Motherboard 340 Version Chipset Baffle Plate Line for Redsail Vinyl Cutter
Item Code: CS-RS-OT03
2 Port USB / Serial port Motherboard 340 Version Chipset Baffle Plate Line for Redsail Vinyl Cutter 340 version, if you need other versions, please contact customer service To be used with: Redsail Vinyl Cutter RS360C, RS450C, RS500C, RS720C, RS800C, RS1120C, RS1360C, CRS1600C, RS1780C
Ships to United States
US Stock CALCA AS10 Sublimation-Resistant Powder(2.2lbs Pack, 1kg, Fine, White)
Item Code: DTF-PDW-61080-US
on the market and both hot and cold PET films for high production output. – 2.2lbs of powder has an application of almost about 100-150 A3 sheets. Specifications: Brand: CALCA Certified: OEKO-TEX Standard 100 Other Names: Polyurethane hot-melt adhesive powder Melt point: 221-257℉ (105 - 125
Ships to United States
Maintop RIP Software V5.5X for Blueprint 2 km42pl/35pl (hardcover)
Item Code: SOF-MTRIP-BP-35PL
Title: Maintop RIP Software V5.5X for Blueprint 2 km42pl/35pl (hardcover) To be used with: Blueprint 2 km42pl/35pl Computer Syetem: Windows98/2000/XP/Vista/Windows7/Windows8 Key Features: • New Dot Curve The new dot curve can adjust distribution ratios of the small ,medium and
Ships to United States
180gsm Backlit Textile Fabric for Light Boxes 80"x262´ (2.03mx80m)
Item Code: BS-JC-QZ03-80R
-Light for transportation and installation 300-600gsm-Too heavy Environmental Protection Yes.PVC Free,Recycled No Fire Retardant B1 Grade FR-Suitable for public area No Foldable Could be folded after printing-Save delivery cost and won't bring shadow. Must roll package-Inconvenient
Ships to United States
8GB Wooden USB 2.0 Flash Pen Drive Memory Stick Bamboo U Disk + Wood Case Box
Item Code: SIC-WDUD-01
/ME/2000/XP, Linux2.4.x • Support USB ZIP / HDD Startup • Material: Maple wood • Product Size: 60x30x10mm (U Disk), 83 x 53 x 20mm(With Box) Package Includes: 1x Oval U Disk 1x Wooden Box
Ships to United States
1cm (2/5 inch) Double Curling Guide Hemming Guide for Silicon Edge Sewing Machine
Item Code: CS-ACC-MT-DCG1
Description: With this guide ,you can make a hemming or pocket, and put rope through it. Suitable Model: Silicon Edge Sewing Machine CS-MT-KC01-2PL
Ships to United States
35W 12V 2.9A IP67 LED Meanwell Plastic Waterproof Power Supply
Item Code: LED-LZ-35W-12
reliability Natural draft cooling 100% full load burn-in test Can be used for a variety of extreme environmental applications Lead free process, in line with the requirements of environmental protection RoHS 2 years warranty Specifications: Input voltage range: 90-264VAC Output voltage: 12V Certificate: CE
Ships to United States
