Cart 
Order Tracking
Generic 1500mm Long, 5mm Wide Roland SP-540V Pad Cutter - 21545137
Item Code: ACC-ROL-244
Generic 1500mm Long, 5mm Wide Roland SP-540V Pad Cutter - 21545137 Printer Compatibility: Roland SP-540V / SP-300 / VP-300 / SP-300V Package Size: 2.36" x 2.36" x 0.78" (60 x 60 x 20mm) Gross Weight: 8g Manufacturer: Ving Parts Part No.: 21545137 Warm tips：There
Ships to United States
DY10 80W Power supply for RECI W1 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY10-220V
Mark & model: DY10, small size, quick response, it is suitable for Reci W2/S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power supply / power source adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power supply / power source makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2/S2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the supply / power source is not over the current limitation. Quality Report:
Ships to United States
Tajima High Quality Acrylic PVC Board Hook Knife Cutter, Arched Acrylic Hook Knife
Item Code: SIC-ZG-MG-010
steel blade made in Japan. • Blade setter with auto-lock function to ensure safe. • The blade can be retracted into the holder after use. • Safety lock system achieves, more safe application and low fatigue in use. • Hook shaped cutting blade is designed to scrape plastic surfaces to
Ships to United States
Original Pinch Roller Assembly for Redsail RS-360C / RS-720C / RS-1120C / RS-1360C Vinyl Cutter
Item Code: CS-RS-PRA01
Description: Original Pinch Roller Assembly for Redsail RS-360C / RS-720C / RS-1120C / RS-1360C Vinyl Cutter • With the new high-precision bearing and new and wear-resisting rubber, the item has a stronger paper feeding ability. • The dual-spring set makes it easily to adjust the pressure
Ships to United States
A3 Non Slip Vinyl Cutter Plotter Cutting Mat with Craft Sticky
Item Code: SIC-CM-CP-A3
• Non Slip. • Sticky Printed Grid • Durable and Convenient. • Comes with marking grids for accurate cutting. The cutting mat is produced for the vinyl cutter plotter. With the help of this sticky cutting mat, you can cut almost everything which is single layer. To avoid the
Ships to United States
Ving Tools Blade Holder for Mimaki Vinyl Cutter, 51mm Length, OEM
Item Code: CS-MM-BH01
-1313, CFR-1220, CF-0907-2, CF-0912-2, CF-1215-2, CF-1218-2. Mimaki CJV30-60, CJV30-60BS, CJV30-100, CJV30-100BS, CJV30-130, CJV30-130BS, CJV30-160, CJV30-160BS, TPC-1000. Using Guide: • Vinyl cutter blade holder works perfect if cutting blades stretch out not too long but within 0.5mm. &bull
Ships to United States
Ving Tools Small Blade Holder for Graphtec CB09 Plotter Vinyl Cutter, OEM
Item Code: CS-GR-BHS-I
to down) 31.5mm • Blade size: 19mm±1 (Length) x 0.9mm (diameter) Details: Using Guide: • Vinyl cutter blade holder works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY20-220V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 60mm Length, OEM
Item Code: CS-ROLAND-BH60
Blade Holder for Roland Vinyl Cutter, 60mm Length, OEM Description: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 14mm • Diameter(Blade
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 56.5mm Length, OEM
Item Code: CS-ROLAND-BH565
Blade Holder for Roland Vinyl Cutter, 56.5mm Length, OEM Features: • Brand new • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • High quality, extra long life Specification: • Diameter(Clamp): 11.5mm • Diameter(Blade): 2mm &bull
Ships to United States
Ving Tools Blade Holder for IOLINE Vinyl Cutter, 43mm Length, OEM
Item Code: CS-IOLINE-BH-C
• Diameter(Blade): 1.5mm • Length(Clamp to down): 28mm • Overall Length: 43mm Using Guide: • Vinyl cutter blade holder works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little bit longer
Ships to United States
Ving Tools 30 Degree IOLINE Compatible Vinyl Cutter Blade, 5pcs/pack, OEM
Item Code: RCCB-IOLINE30-C
knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and
Ships to United States
18mm Tajima High Quality Rachet Lock Snap Off Utility Knife Cutter
Item Code: SIC-ZG-MG-005
Description: • Material: Out covering: plastic; Blade: fine steel; • Blade setter with auto-lock function to ensure safe; • High quality blades used, easy to replace; • Professional cutter in comfortable streamline style is perfect composing of plastic and metal. &bull
Ships to United States
Ving Tools 45 Degree IOLINE Vinyl Cutter Blade for Vinyl Cutting, 5pcs/pack, OEM
Item Code: RCCB-IOLINE45-C
damage your material; • The cutting speed is extremely quick with extra long life. Used for: It can be used for vinyl cutter, electronic film cutter proofer, roll to roll cutting machine. Note: • If you use different cutters or different papers, you should adjust the extended length of
Ships to United States
Ving Tools Blade Holder for Summa Vinyl Cutter, 45.5mm Length, OEM
Item Code: CS-SUMMA-BH01
Blade Holder for Summa Vinyl Cutter, 45.5mm Length, OEM High precision, good clamping performance and perfect in workmanship! Description: • Adopted imported high-quality aluminum alloy and imported resin material, and produced by elaborate machines; • High precision, durable and extra
Ships to United States
Liyu SC Series Carriage - Old Version 7-Pin Interface Replacement Part for Vinyl Cutter
Item Code: CS-LY-CA01
Description: Engineered with a balanced-force design, this carriage applies even pressure at both ends, translating to smoother motion, reduced blade chatter, and consistently clean cuts. Perfect Fit Guarantee – Check Before You Buy! • Important: The LIYU SC Series has two distinct
Ships to United States
Generic Roland SC-545EX Pad Cutter (Length 1500mm, Width 8mm) - 22635116
Item Code: ACC-ROL-311
Generic Roland CJ-540 Pad, Cutter - 22635116 Length 1500mm, Width 8mm Printer Compatibility: Roland CJ-540 / SC-540 / SC-545EX / XC-540 Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
Ving Tools Blade Holder for Roland Vinyl Cutter, 55mm Length, OEM
Item Code: CS-ROLAND-BH55
Blade Holder for Roland Vinyl Cutter, 55mm Length, OEM Features: • Brand New • Aluminum-precision vertical adjustment • Double bearings • Screw adjustment • .High quality, extra long life Specification: • Diameter(Clamp): 12mm • Diameter(Blade): 2mm &bull
Ships to United States
Original Metal Blade Holder for Redsail Vinyl Cutter, 44.5mm Length
Item Code: CS-RS-BH01
-precision vertical adjustment Double bearings, screw adjustment High Quality, Extra Long Life, Brand New Details: Blade Holder for Redsail Vinyl Cutter Using Guide: • It works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade
Ships to United States
Generic Roland XR-640 Pad, Cutter - 1000009646 Length 1500mm, Width 7.5mm
Item Code: ACC-ROL-310
Generic Roland XR-640 Pad, Cutter - 1000009646 Length 1500mm, Width 7.5mm Printer Compatibility: Roland XR-640 Manufacturer: Ving Parts Warm tips：There is no double face tape on it.
Ships to United States
A4 Non Slip Vinyl Cutter Plotter Cutting Mat with Craft Sticky Printed Grid
Item Code: SIC-CM-CP-A4
for accurate cutting. The cutting mat is produced for the vinyl cutter plotter. With the help of this sticky cutting mat, you can cut almost everything which is single layer. To avoid the paper moving during work, it’s better to use the cutting mat because of the feature of cutting mat sticky
Ships to United States
Original Metal Blade Holder for Redsail Vinyl Cutter, 50.5mm Length
Item Code: CS-RS-BH02
adjustment High Quality, Extra Long Life, Brand New Details: Blade Holder for Redsail Vinyl Cutter Using Guide: • It works perfect if cutting blades stretch out not too long but within 0.5mm. • When cutting small letters, cutting blade could stretch out a little bit longer. &bull
Ships to United States
15mm Belt Width Timing Synchronous Pulley for CO2 Laser Cutter, Dia. 8mm, 24 Teeth
Item Code: CS-BP-HTD-3M-8
To be used with: Dahua, Yueming, Boye, and Argus Sunic, etc. Laser engraving and cutting machine. 24 tooth gears, aluminium alloy
Ships to United States
9mm Snap Off Utility Knife Blade for Tajima Small Size Craft Knife Cutter
Item Code: SIC-ZG-MG-016
: Plastic; • Blade material: steel; • Blade setter with auto-lock function to ensure safe; • High quality blades used; Easy to replace the blade; • Safety lock system achieves more safe application and low fatigue in use. • Hook shaped plastic cutting blade is designed to
Ships to United States
