Cart 
Order Tracking
RGB Color Flexible LED Light Strip(60 SMD 5050 leds per meter waterproof IP65) 5m/roll
Item Code: LED-CM-5050-RGB12V60IP65
This flexible LED light strip with high power 5050SMD RGB LEDs. 5 meter (197 in) with copper,white finish. Non-weatherproof flexible light strips with adhesive backing, can be cut into 3-LED segments. No RGB controller on board, strips have separate RGB power inputs and common anode wire, Use any of our Universal RGB Controllers to dynamically control the strips - Due to voltage drop, after 5 meters run wire back to source. 12VDC operation. Characteristics: Soft and flexible, can be bent as will; Long service life: 50000 hours (5 years), no flickering, no RF interference, high lightness, high light transmission . Widely used for architectural decorative lighting, amusement park, theater and aircraft cabin mood lighting, hallway and walkway lighting, stairway accent lighting, art lighting for signage letters, cove lighting, emergency exit path lighting, cabinet and under counter lighting, exhibition stands and panels, display cases, etc. Quality Report: Free shipping on order over 288usd in 25 areas: Puerto Rico, Canada, France, England, America, Australia, Germany, Japan, Thailand, Belgium, Spain, Maldives, Philippines, Russia, South Korea, India, Malaysia, Singapore, Indonesia, Vietnam, Cambodia, Greek, Israel, Pakistan
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 110V
Item Code: CS-PS-DY20-110V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 /W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
RGB Color Flexible LED Light Strip(60 SMD 5050 leds per meter nonwaterproof) 5m/roll
Item Code: LED-CM-5050-RGB12V60NF
This flexible LED light strip with high power 5050SMD RGB LEDs. 5 meter (197 in) with copper,white finish. Non-weatherproof flexible light strips with adhesive backing, can be cut into 3-LED segments. No RGB controller on board, strips have separate RGB power inputs and common anode wire, Use any of our Universal RGB Controllers to dynamically control the strips - Due to voltage drop, after 5 meters run wire back to source. 12VDC operation. Characteristics: Soft and flexible, can be bent as will; Long service life: 50000 hours (5 years), no flickering, no RF interference, high lightness, high light transmission . Widely used for architectural decorative lighting, amusement park, theater and aircraft cabin mood lighting, hallway and walkway lighting, stairway accent lighting, art lighting for signage letters, cove lighting, emergency exit path lighting, cabinet and under counter lighting, exhibition stands and panels, display cases, etc. Quality Report: Free shipping on order over 288usd in 25 areas: Puerto Rico, Canada, France, England, America, Australia, Germany, Japan, Thailand, Belgium, Spain, Maldives, Philippines, Russia, South Korea, India, Malaysia, Singapore, Indonesia, Vietnam, Cambodia, Greek, Israel, Pakistan
Ships to United States
60" (1.52m) High Quality 3D Carbon Fiber Vehicle Wraps
Item Code: BS-CAQ-60R-DS
Description: Protect the paint, protect the value: • To prevent sand splash damaging the body, to cover body scratch. • To refract harmful light, cut off the damage of strong light and UV for car lacquer, protect the original paint gloss and durability. • To resist most of oil, grease, fuel, fat solvent, weak acid, weak salt. Also cut off the acid rain, snow melt agent on the car body erosion. • Toughness reply force improve 10 times above, automatically bridge the small scratches, resist general cut, friction and wear. • To protect the vehicles degree of copying new look. Individual character style, perfect changing color: • Durable, made by the standard process, good for three years. • Without joining together, have no trace, guarantee integrity of the car surface. • Lasting and natural, the car is an organic whole, reflect the car paint sense. • The stickers colors can be free, can also be more color free to go all out stick, realize local and overall perfect effect. Strong joint, cover even: • No drape, no bubble, no crack, blister. • Super toughness in the construction in curved surface, can maintain the uniform color. Convenient construction and maintenance: • Strong flexibility, ductility ( Any stretch after warming up, it can finalize the design not to shrink under normal temperature). Characteristics of being easy uncovered, removed, renewable in construction process can be repeated construct. • Save time and cost when washing the car wax. Leave no incomplete glue, protect environment: • Easy to stick, easily uncovered and remove, joint closely, leave no residual, and achieve incredible breathtaking effect. • No toxic pollution produce to do harm to paint, people and nature. Quality report:
Ships to United States
Blue LED Name Badge Whit Scrolling Message 4*1.3*0.2in( 102 x 33 x 5mm)
Item Code: LEDNB-LYS-1248B
Color: Blue Dot matrix: 12 x 48 1.75mm Frame Size: 102mm*33mm*5mm Screen Size: 86mm*25mm Net weight: 35g Display in English, Simplified Chinese, Traditional Chinese, Korean, Japanese and Russian, etc. Display 8 text messages or 8 text&image messages; maximum 1600 English characters and 760 Chinese characters. Button switch: 4 grades of brightness: 25%, 50%, 75% and 100%. 8 levels of speed adjustment. 16 image available Display mode: Scroll, Snow, Flash, Hold, Hold with circle and so on. Recharge time: 2-3 hours, AC110-220V or USB to the computer; Working time: 12-24 hours depend on brightness Battery: rechargeable lithium battery, 3.7V. Easy to download messages via PC. It can display 6 English letters/ 4 Chinese letters in static state. Quality Report:
Ships to United States
Red LED Name Badge Whit Scrolling Message 4*1.3*0.2in( 102 x 33 x 5mm)
Item Code: LEDNB-LYS-1248R
Color: Red (If you need other color, please search in our store) Dot matrix: 12 x 48 1.75mm Frame Size: 102mm*33mm*5mm Screen Size: 86mm*25mm Net Weight: 35g Display in English, Simplified Chinese, Traditional Chinese, Korean, Japanese and Russian, etc. Display 8 text messages or 8 text&image messages; maximum 1600 English characters and 760 Chinese characters. Button switch: 4 grades of brightness: 25%, 50%, 75% and 100%. 8 levels of speed adjustment. 16 image available Display mode: Scroll, Snow, Flash, Hold, Hold with circle and so on. Recharge time: 2-3 hours, AC110-220V or USB to the computer; Working time: 12-24 hours depend on brightness Battery: rechargeable lithium battery, 3.7V. Easy to download messages via PC. It can display 6 English letters/ 4 Chinese letters in static state. Quality Report:
Ships to United States
Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type
Item Code: CS-HD-BC06
Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type Description: Processing Material: Acrylic, Plastic, PVC, Plexiglass This Luxury Manual Acrylic Letter Making Bending Machine Tool, A+U Type is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making. It is suitable for heating acrylic within 1.5mm-4mm (0.06" x 0.16") thickness. Feature • Adopting PTC heating elements; • Aluminum alloy thermal conductive plate is heating even; • Adopts high quality heat-resistant engineering plastics, non-stick the acrylic sheet; • Easy to operate and durable. Benefit • PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control. • Aluminum alloy thermal conductive plate can automatic adjust the angle between heating plate and acrylic. • Making angle bending straight. • Make your curved angles in beautiful arc. • Easy operation, time-saving. • Warranty: 2 years. Sepcification Voltage: AC 100-240V Constant Power: Arc bending 60W±10%, Angle bending 39W±10% Heating Temperature: 200°C±5% Bending Letter Hight: 0 - 100mm (3.9") Bending Thickness: 1.5mm - 4mm Arc bending soft time (2.5mm thickness, 20℃): About 9 seconds Angle bending soft time (2.5mm thickness, 20℃): About 3 seconds Arc Heater Size: 100mm x 50mm x 2mm (3.9" x 2" x 0.08") 360 Degree Rotate End: Many tools are used frequently, its power cable is easy to get kink and break up. But our CS-HD-BC06 acrylic bending machine tool can avoid this situation because of the 360 degree rotate design of the power cable and heating plate joint. Remarks: • You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven. • If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within 150mm. • With short preheat time; restart the bender won't waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity. • Please do not put the heating plate onto the power cable. • Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order. • 1pc PTFE Coated Fiberglass Adhesive Tape will be gift for you when you buy A type angle bending tools. How to use the High Temperature PTFE Coated Fiberglass Adhesive Tape? Place cut the adhesive tape into 3mm width, and then stick them on both sides of angle bender respectively. The PTFE Coated Fiberglass adhesive tape can be used many times. You can use the PTFE Coated Fiberglass Adhesive Tape when you want heat PVC board. Comparison for Our Original Acrylic Bender and Copycat Acrylic Bender For now there are many copycat acrylic bender, Acrylic bending machine, handheld acrylic bending tools in the market with inferior quality and awful performance. It will highly effect work efficiency in 3D letter channel making process. We list the comparison between our original acrylic bender and copycats acrylic bender as below; it is for clients better knowing how to choose acrylic bender before purchase. We bought copycats products below and disassemble them to list their parts and our acrylic bender inside parts for clients better knowing about their quality. Heating plate of our Acrylic Bender Heating plate of COPYCAT Acrylic Bender Temperature Control PCB part of our Acrylic Bender Temperature Control PCB part of COPYCAT Acrylic Bender Power Switch part of our Acrylic Bender Power Switch part of COPYCAT Acrylic Bender Power Plug of our Acrylic Bender Power Plug of COPYCAT Acrylic Bender PERFORMANCE COMPARISON Our Acrylic Bender COPYCAT Acrylic Bender About heating insulation film, the reason our acrylic bender do not put heat insulation film is the operator do not need to use finger to clamp this area to bend acrylic sheet. If you choose our original acrylic bender, you just need to handheld to operate as bellow. As the copycat cannot hold the acrylic sheet seamlessly so that will need your finger to help to bend it like below picture, so they have to put insulation film or their acrylic bender cannot hold and bend acrylic bender fully. Our Acrylic Bender COPYCAT Acrylic Bender About Vertical guide in copycat products, as we design acrylic bender its head are all flat, so it will have an vertical angle against desk when operator use it, so this vertical guide is totally useless. Our Acrylic bender head are all designed to be flat, that will have vertical angle when operator use it against desk Connect the power cable, after about 60 seconds heating time, you can use the bender. Using the angle or arc bender vertically clamp the acrylic plate, soften the acrylic plate several seconds, and then remove the bender, make angle and arc you want, fix it with glue. Sharp Corner Bending Machine Tool (Acrylic Angle Bending Machine Tool) Round Corner Bending Machine Tool (Acrylic Arc Bending Machine Tool) Processing Material: Acrylic, Plastic, PVC, Plexiglass This type acrylic bender is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making.
Ships to United States
Generic Mimaki JV33 Power Board - M013520
Item Code: ACC-MIM-087
Generic Mimaki JV33 Power Board - M013520 Printer Compatibility: Mimaki CJV30-100 / CJV30-130 / CJV30-160 / CJV30-60 / JV33-130 / JV33-160 / JV33-260 / TS3-1600 Manufacturer: OEM
Ships to United States
Epson Stylus Pro 4910 Pump Assembly-1582011
Item Code: ACC-EPS-193
Epson Stylus Pro 4910 Pump Assembly-1582011 Printer Compatibility: Epson Stylus Pro 4910 / 4900 Remarks: Original
Ships to United States
Display Table Stand for Shop
Item Code: SIC-JHB12
This poster display stand is used along with POP advertising paper (banner), and it is widely used in supermarkets, promotion table, counters, exclusive stores or shops and other POP promotional displays, and applicable to A3, A4, 4K and other dimensions. The product is durable and cost-effective since coming into market. At present, there are many shopping malls and enterprises using it.
Ships to United States
Ink Filter for Inkjet Printers Using Spectra Polars PQ-512 Printhead（Please Choose the Type,OD:4mm / 6mm)
Item Code: ACC-LFP-191
Descriptions: Our Spectra PQ-512 Printhead filter is stable in quality and high in cost-performance. The filter element using corrosion-resistant polymer material. It is applicable for the Spectra PQ-512 Printhead large format printers made in China. Features: • #4 model is suitable for 4 x 2.3, 4.2 x 2.8, 5 x 3 ink tube, and #6 model is suitable for 6 x 4, 6 x 3.7 ink tube. • Diameter：4.5cm. • Made of special material, anticorrosion and long service life. • It's easy to use and convenient to replace. Printer Compatibility: Gongzheng / Flora Inkjet Printers Using Spectra PQ-512 Printhead Manufacturer: Ving Parts Net Weight: 9g/pc Packing Size: 2.6" x 2.2" x 1.4" (65 x 55 x 35mm) Gross Weight: 10g / pc Quality Report:
Ships to United States
Genenric Roland Ink Cartridge Bag,440ml
Item Code: ACC-ROL-174-R
Genenric Roland Ink Cartridge Bag,440ml Printer Compatibility: All Roland Machines Manufacturer: Ving Parts
Ships to United States
GZ-3208 Printer Mainboard
Item Code: ACC-GZ-001
GZ-3208 Printer Mainboard Printer compatibility: GZ-3208 Printer Manufacturer: Gongzheng Warm Tips: As Chinese printer manufacturers update the board control systems very frequently, hereby we suggest you double check the version of the board before placing orders.
Ships to United States
50pcs Foam Cleaning Swabs for Epson / Roland / Mimaki / Mutoh Inkjet Printers 5" Long
Item Code: ACC-ROL-094
50pcs Foam Cleaning Swabs for Epson / Roland / Mimaki / Mutoh Inkjet Printers 5" Long Printer Compatibility: All Epson, Roland, Mimaki, Mutoh, XAAR, Konica, Seiko, Spectra printers Manufacturer: Ving Parts Ink Type: Solvent, ECO-Solvent and Water-based Net Weight: 102g/package Packing Size: 150mm*140mm*40mm Head length: 25mm (0.98") Head width: 15mm (0.59") Head thickness: 8.5mm (0.33") Package Included: 50pcs Caution: Application: Made of imported polyester sponge with low fume forming rate. Made of other material, high fume forming rate. Plastic rods are environmental-friendly and durable. The rods are emitting smell and not environmental-friendly. High-quality absorbent cotton head, elastic and durable. Poor water absorption and low elasticity. 1. The swabs are made in full-automated production line, ensuring a high degree of cleanliness, completely non-fluff, no metal ions and other pollutant. 2. With outstanding quality among all cleaning swabs, our swabs has nearly no crumbs or ionic contamination, therefore, they are suitable for inkjet printhead cleaning. 3. The continuous research and development (R&D) work improves the swab quality, and R&D make us continue to produce high-quality cotton cleaning swabs. 4. The swab bags are collected and sealed in full- automated production lines, ensuring safe packaging and no prior contacts with human hands or other pollutant sources.
Ships to United States
Mo Reflective Mirrors Laser Lens Dia. 25mm / 0.98" THK 3mm for CO2 Laser Engraving and Cutting
Item Code: CS-RM-25-3
Brand New, High Quality Reflective Mirror for CO2 Laser Diameter: 25mm (0.98") Thickness: 3 mm (0.12") Material: Mo Coating: No coated, just polished. Suitable for: 40-200W CO2 laser engraving & cutting machines Features This optical element is used for planar reflecting the laser beam and is an important component of the laser system. The biggest advantage of molybdenum mirror is it has high damage threshold. So it can be used in some high power laser systems such as laser engraving machines and laser cutting machines. As a kind of high quality molybdenum mirrors, it has high reflectance and low flatness. Using the high quality surface coating will protect the layer of molybdenum not to damage, and increases the molybdenum layer reflection efficiency. Please look at the "About the optical path" PDF file to find more information about installation of the reflection mirror. Mo reflective mirror can work under the strict environment; it has advantages of long using life, bearing high power, no need coating and scrub resistance. But its reflectivity is a little lower than Si mirror. Si reflective mirror have good optical thermal resistance, it is the most used mirror. Gold - plated Mo silicon mirror surface, improve the reflectivity. Widely used in the following brands engraver:
Ships to United States
Mo Reflective Mirrors Laser Lens Dia. 20mm / 0.79" THK 3mm for CO2 Laser Engraving and Cutting
Item Code: CS-RM-20-3
Brand New, High Quality Reflective Mirror for CO2 Laser Diameter: 20mm (0.79") Thickness: 3 mm (0.12") Material: Mo Coating: No coated, just polished. Suitable for: 40-200W CO2 laser engraving & cutting machines Features This optical element is used for planar reflecting the laser beam and is an important component of the laser system. The biggest advantage of molybdenum mirror is it has high damage threshold. So it can be used in some high power laser systems such as laser engraving machines and laser cutting machines. As a kind of high quality molybdenum mirrors, it has high reflectance and low flatness. Using the high quality surface coating will protect the layer of molybdenum not to damage, and increases the molybdenum layer reflection efficiency. Please look at the "About the optical path" PDF file to find more information about installation of the reflection mirror. Mo reflective mirror can work under the strict environment; it has advantages of long using life, bearing high power, no need coating and scrub resistance. But its reflectivity is a little lower than Si mirror. Si reflective mirror have good optical thermal resistance, it is the most used mirror. Gold - plated Mo silicon mirror surface, improve the reflectivity. Widely used in the following brands engraver:
Ships to United States
9mm Economic Snap Off Paper Craft Utility Knife Cutter
Item Code: SIC-ZG-MG-002
Description: • Material: Out covering: plastic; Blade: fine steel. • Blade setter with auto-lock function to ensure safe. • High quality blades used, easy to replace. • Professional cutter in comfortable streamline style is perfect composing of plastic and metal. • Metal cover brings superiative stability and strength, and safety lock system achieves more safe application and low fatigue in use. • Additional quick-change and locking features will ensure that jobs will be faster, safer, and easier. • It can be used for cutting some soft or thin things like paper, lamp cloth, paster, vinyl, etc.
Ships to United States
Original Roland CJ-540 / XC-540 / XJ-540 Wiper Belt, 408P2M4-530 - 11929138
Item Code: ACC-ROL-105
Original Roland CJ-540 / XC-540 / XJ-540 Wiper Belt, 408P2M4-530 - 11929138 Printer Compatibility: Roland CJ-540 / FJ-540 / SC-540 / SC-545 EX / SJ-1000 / SJ-1045 EX / SJ-540 / SJ-640 / SJ-645 EX / SJ-740/ SJ-745 EX / VP-300/ VP-540 / XC-540 / XJ-540/ XJ-640 / XJ-740 / LEJ-640 / RS-540 / RS-640 Manufacturer: Roland Part No.: 11929138 This Belt, 408P2M4-530 is suitable for Roland CJ-540 printers. This is the original Roland part number 11929138. This belt is 39cm long and 0.4cm wide. This belt is not suitable for SP-300, SP-300V, SP-540 and SP-540V printers which require part number 11929139.
Ships to United States
Mo Reflective Mirrors Laser Lens Dia. 30mm / 1.18" THK 3mm for CO2 Laser Engraving and Cutting
Item Code: CS-RM-30-3
Brand New, High Quality Reflective Mirror for CO2 Laser Diameter: 30mm (1.18") Thickness: 3 mm (0.12") Material: Mo Coating: No coated, just polished. Suitable for: 40-200W CO2 laser engraving & cutting machines Features This optical element is used for planar reflecting the laser beam and is an important component of the laser system. The biggest advantage of molybdenum mirror is it has high damage threshold. So it can be used in some high power laser systems such as laser engraving machines and laser cutting machines. As a kind of high quality molybdenum mirrors, it has high reflectance and low flatness. Using the high quality surface coating will protect the layer of molybdenum not to damage, and increases the molybdenum layer reflection efficiency. Please look at the "About the optical path" PDF file to find more information about installation of the reflection mirror. Mo reflective mirror can work under the strict environment; it has advantages of long using life, bearing high power, no need coating and scrub resistance. But its reflectivity is a little lower than Si mirror. Si reflective mirror have good optical thermal resistance, it is the most used mirror. Gold - plated Mo silicon mirror surface, improve the reflectivity. Widely used in the following brands engraver:
Ships to United States
Manual Three-way Valve (plastic)
Item Code: ACC-LFP-018C
Manual Three-way Valve for Sino printers Used to clean ink system. Printer Compatibility: All Wide Format Printers. Manufacturer: Ving Parts
Ships to United States
Epson 7700 Maintenance Box-1554898
Item Code: ACC-EPS-235
Epson 7700 Maintenance Box-1554898 Printer Compatibility: Epson Stylus Pro 7700 / Pro 7910 / Pro 9700 / Pro 7710 / Pro 9710 / Pro 7890 / Pro 9890 / Pro 11880 Manufacture: Epson
Ships to United States
Genenric Mimaki Ink Cartridge Bag,440ml
Item Code: ACC-ROL-174-M
Genenric Mimaki Ink Cartridge Bag,440ml Printer Compatibility: All Mimaki Machines Manufacturer: Ving Parts
Ships to United States
Manual Two-way UV Valve (plastic)
Item Code: ACC-LFP-018B
Manual Two-way UV Valve for Sino Printers Used to clean ink system Printer Compatibility: All Wide Format Printers Manufacturer: Ving Parts
Ships to United States
Manual Three-way UV Valve (plastic)
Item Code: ACC-LFP-018D
Manual Three-way UV Valve for Sino printers Used to clean ink system. Printer Compatibility: All Wide Format Printers Manufacturer: Ving Parts
Ships to United States
