Cart 
Order Tracking
Loop Rubber Timing Belt 327-3M for CO2 Laser Cutter, 15mm Width and 327mm Length, Pitch 3mm
Item Code: CS-BLT-327-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 327mm Sleeve Width: 450mm Teeth No.: 109mm
Ships to United States
US Stock-Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100-US
), laser on when low level(≤0.3V) G Signal ground This terminal must be connected with outer shell and control board of machine properly IN Power signal Laser power control terminal, control with 0-5V analog signal or 5V PWM signal 5V Output 5V output, max output current is 20mA Advantages
Ships to United States
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P14
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V Description P14, wideband and wide volt input, multi protections, the input could show the signal detection, the electric signal of machine tool control card as well as the fault analysis of
Ships to United States
Original RECI P16 Power Supply with Digital Display Intelligent for RECI S6 / W6 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P16
Original RECI P16 Power Supply with Digital Display Intelligent for RECI S6 / W6 CO2 Laser Tube, 90V -250V Description: P16, Function Features: The power supply is capable to monitor the working condition of laser machine tool in real time, analyze the problem intelligently and provide solution to
Ships to United States
Original RECI P18 Power Supply with Digital Display Intelligent for RECI S8 / W8 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P18
Original RECI P18 Power Supply with Digital Display Intelligent for RECI S8 / W8 CO2 Laser Tube, 90V -250V Description P18, Function features: Wideband and wide volt input, multi protections, showing the electric signal of machine tool control card, monitoring the feedback electric signal of laser
Ships to United States
US Stock,CALCA 51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate
Item Code: LCM-DR-1390-130W-US
_130w_co2_laser_cutter_with_auto_focus_function_fda_certificate.html CALCA 51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate The machine is a laser engraver and cutter equipped with 130W CO2 Laser Tube. It is used to engrave on wood, bamboo, Plexiglas, crystal
Ships to United States
US Stock, Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-QD2-6040-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Qomolangma 24" x 16" 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Ships to United States
MEM 220V 4KW 20in x 27.5in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ5070
MEM 220V 4KW 20in x 27.5in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy -duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best
Ships to United States
MEM 220V 4KW 20in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ5060
MEM 220V 4KW 20in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy -duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best
Ships to United States
A3 16.5in x 11.7in No Cut Laser Dark Heat Transfer Paper, A+B Paper (Each for 100 Sheets)
Item Code: HTPL-AB-A3-100SET
LASER DARK No-Cut Heat Transfer Paper This Self-Weeding 2-Paper-System gives amazing and consistent results:Transfer white and light colors onto black, dark, and light-colored garments, including cotton, polyester, and blends, as well as paper/carton and book covers, with an Oki 711 White Toner
Ships to United States
A4 8.3in x 11.7in No Cut Laser Dark Heat Transfer Paper, A+B Paper (Each for 100 Sheets)
Item Code: HTPL-AB-A4-100SET
LASER DARK No-Cut Heat Transfer Paper This Self-Weeding 2-Paper-System gives amazing and consistent results:Transfer white and light colors onto black, dark, and light-colored garments, including cotton, polyester, and blends, as well as paper/carton and book covers, with an Oki 711 White
Ships to United States
50 Pack Multicolor Metal Business Cards Blanks Aluminum Sheet Blank Metal Tags Materials for Laser Engraving DIY Gift Cards
Item Code: CS-EB-ABCM-50P
50 Pack Multicolor Metal Business Cards Blanks Aluminum Sheet Blank Metal Tags Materials for Laser Engraving DIY Gift Cards Suitable as VIP card or gift metal card to make it more outstanding and unique, make your identity distinguished. Aluminum sheet is perfect used for make business cards, gift
Ships to United States
CALCA 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-CALCA-TQ4050
CALCA 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the CALCA double station presses combines a heavy -duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best
Ships to United States
S&A CWFL-1500 Industrial Water Chiller for Cooling 1500W Fiber Laser, AC 1P 220V, 50Hz
Item Code: CW-FL-1500ANPTY
machine can always be well protected against circulation problems or overheating. This laser water chiller is also designed with easy-to-read level check, caster wheels for easy mobility, high performance cooling fan and intelligent temperature control function which suggests water temperature can adjust
Ships to United States
WSX-GQ-001A 2000W Middle Power Fiber Laser Cutting Head(Collimator Focal Length: 75mm;Focal Length: 125mm)
Item Code: CS-WSX-GQ-001A-1
control. Protective lens take more convenient replacement drawer installation way. It is modular design with high precision, easy to maintain. Can be equipped with various kind of QBH connector’s laser machine. Technical Parameters： Max Laser Power: 2000W Fit for Laser Machine IPG, SPI, Rofin
Ships to United States
WSX-GQ-001A 2000W Middle Power Fiber Laser Cutting Head(Collimator Focal Length: 75mm;Focal Length: 150mm)
Item Code: CS-WSX-GQ-001A-2
control. Protective lens take more convenient replacement drawer installation way. It is modular design with high precision, easy to maintain. Can be equipped with various kind of QBH connector’s laser machine. Technical Parameters： Max Laser Power: 2000W Fit for Laser Machine IPG, SPI, Rofin
Ships to United States
WSX-GQ-001A 2000W Middle Power Fiber Laser Cutting Head(Collimator Focal Length: 100mm;Focal Length: 125mm)
Item Code: CS-WSX-GQ-001A-3
control. Protective lens take more convenient replacement drawer installation way. It is modular design with high precision, easy to maintain. Can be equipped with various kind of QBH connector’s laser machine. Technical Parameters： Max Laser Power: 2000W Fit for Laser Machine IPG, SPI, Rofin
Ships to United States
WSX-GQ-001A 2000W Middle Power Fiber Laser Cutting Head(Collimator Focal Length: 100mm;Focal Length: 150mm)
Item Code: CS-WSX-GQ-001A-4
control. Protective lens take more convenient replacement drawer installation way. It is modular design with high precision, easy to maintain. Can be equipped with various kind of QBH connector’s laser machine. Technical Parameters： Max Laser Power: 2000W Fit for Laser Machine IPG, SPI, Rofin
Ships to United States
Embossed Rolling Pin, Diy Tool for Homemade or Christmas Cookies, Laser Engraved Rolling Pin for Baking Christmas Pattern Pastry
Item Code: CS-EB-RP01
Christmas Embossed Rolling Pins DIY Tool Description: Size : 5.5 in (Total Length) Type: Rolling Pin Material: Grass tree Pattern : Christmas Deer, Tree, Christmas Gift, Snowflakes, Flowers Pattern Weight:0.26Kg(0.57lb) Packing Size: 26 x 23 x 4.6cm(10.5" x 9" x 1.8") Gross Weight: 0.5Kg(1.1lb) Multiple modes: Rolling pin with deer, Christmas tree, Christmas gift, snow, flowers and other patterns for your choice, is the perfect birthday, Mother's Day, Valentine's Day, Easter, Halloween, Christmas and other special holiday gift ideas. SIZE Our high-quality embossed roll stick has a total length of 7 including the handle, and the embossed part is 5.5 inches. The roller design is very easy to use. It is very suitable for children or girls. Good DIY Tools You can let your children make cookies themselves. This can be a good way to develop your child's hands-on ability.Widely use used for pasta cookie dough, pastry, bakery, pizza, fondant, chapati and much more.
Ships to United States
