Cart 
Order Tracking
Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100
terminal must be connected with outer shell and control board of machine properly IN Power signal Laser power control terminal, control with 0-5V analog signal or 5V PWM signal 5V Output 5V output, max output current is 20mA Advantages: Application: Es-100 Laser Power Supply is used for 60W
Ships to United States
Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-QD2-6040
Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System This machine can transfer patterns and texts which are printed by sublimating ink or solvent ink onto fabrics like cotton, linen, chemical fabric, and nylon and ceramics through heat transfer
Ships to United States
Open Ended Single-sided Timing Belt for CO2 Laser Engraver, 25mm Width, Pitch 3mm
Item Code: CS-BLT-HTD-3M-25
with nylon 66 high stretch do protection. To be used with: CO2 laser engraving cutting machine with Spiral cutting, bandwidth 25mm of timing belt. You can cut it according to the actual needs. Specifications Brand: Fulong Model: 3M-25M Materials: Rubber Imported material: Yes Belt Width: 25mm
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 2388mm Length, Pitch 3mm
Item Code: CS-BLT-2388-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 2388mm Sleeve Width: 450mm Teeth No.: 796mm
Ships to United States
US Stock, Ving 300W 2 Optical Path Laser Welder for Fine Metal Channel Letter Making
Item Code: LWM-WF300HZ-S-US
Description: 300W Dual Optical Path Laser Welding Machine for Fine Metal Channel Letter Making 1 Standard YAG Laser Welding Head + 1 handheld Fiber Transmission Laser Welding head with 5m fiber line. Standard welding head can weld small size metal channel letters within 80cm, and the handheld fiber
Ships to United States
Loop Rubber Timing Belt for CO2 Laser Engraver, 15mm Width and 1800mm Length, Pitch 3mm
Item Code: CS-BLT-1800-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection.The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode. And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Specification: Pitch Length: 1800mm Sleeve Width: 450mm Teeth No.: 600mm
Ships to United States
Motorized Up and Down Patform for LEM-RS-M500 Series Laser Engraver
Item Code: CS-LM-MUD01
Motorized Up and Down Patform for Redsail Laser Engraver 1. It is convenient to adjust the focal length. 2. Up and down work plate (Z): 7.8" (200mm, motorized) Remark: Product must be orderd by redsail laser engraving machine.You can not buy it separatly.
Ships to United States
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines
Item Code: LCM-KH-750-100W
High Quality 700mm × 500mm 100W CO2 Laser Engraver and Cutter Machines TThis Laser Engraver is equipped with EFR 100W CO2 Laser Tube. It is used to engrave on wood, bamboo, crystal, leather, rubber, marble, ceramics and glass and etc. It supports multiple graphic formats, such as HPGL, BMP
Ships to United States
Silicone Ring Kit Seal Washer Gasket for Laser Focus Lens Dia.19mm / 20mm
Item Code: CS-TL-01
Description: This silicone ring kit seal washer gasket used for laser focus lens Dia.19mm / 20mm, protect the laser focus lens against slip and scratch.
Ships to United States
Network Cable for Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System
Item Code: CS-AWC-NC
Network Cable for Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System To be used with: Trocen / Anywells AWC708C / AWC708C Plus Laser Controller System
Ships to United States
600W Industrial Air Purifier Used For Laser Processing Wood Dust & Gas Exhaust
Item Code: CS-DMYH-AP700
, long-term exchanges and cooperation with foreign advanced technology enterprises. 3. Imported fans, multi-level filtration system, to ensure efficient purification. Production is rigorous and efficient. The quality of equipment is guaranteed. 1. The factory has introduced a new high-power fiber laser
Ships to United States
51in x 35in 150W CO2 Laser Cutter FDA Certificate, with Auto - focus Function
Item Code: LCM-KH-1390-150W
51" x 35" 150W 1390 format CO2 Laser Cutting Machine, with USB Port and Electric Lifting Worktable, Auto - focus System, FDA Certificate The machine is a laser engraver and cutter equipped with 150W CO2 Laser Tube. It is used to engrave on wood, bamboo, Plexiglas, crystal, leather
Ships to United States
51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate
Item Code: LCM-DR-1390-130W
51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate The machine is a laser engraver and cutter equipped with 130W CO2 Laser Tube. It is used to engrave on wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics and glass and etc. It is a suitable and
Ships to United States
Laser Positioning System for MEM 16" x 20" Pneumatic Double Station Heat Press
Item Code: HTM-MEM-LPC
Laser Positioning System for MEM 16" x 20" Pneumatic Double Station Heat Press It's specially used for MEM 16" x 20" Pneumatic Double Station Heat Press below: HTM-TQ4050, HTM-TQ4050-US Package: Packing Size: 35"x 5.9" x 4.7"/89cm x 15cm x 12cm Gross Weight:4
Ships to United States
Refurbished US Stock, Reci DY10 Power Supply for W2 / S2 CO2 Sealed Laser Tube, 110V, OEM
Item Code: RFB-CS-PS-DY10-110V-US
for w2_s2_co2_sealed_laser_tube_110v_oem.html Mark & model: DY10, small size, quick response, it is suitable for Reci W2 / S2 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor
Ships to United States
1.5KW New Air Cooling Version Handheld Fiber Laser Welder(Welding,Cutting,Rust Removal & Cleaning)
Item Code: LWM-CY-FL1500N
1.5KW New Air Cooling Version Handheld Fiber Laser Welder(Welding,Cutting,Rust Removal & Cleaning) Features 1. Premium-Grade Electrical Components – All core electronics utilize top-tier brands for reliability and performance. 2. Embedded Safety Design – Space-saving layout
Ships to United States
1.2KW New Air Cooling Version Handheld Fiber Laser Welder(Welding,Cutting,Rust Removal & Cleaning)
Item Code: LWM-CY-FL1200N
1.5KW New Air Cooling Version Handheld Fiber Laser Welder(Welding,Cutting,Rust Removal & Cleaning) Features 1. Premium-Grade Electrical Components – All core electronics utilize top-tier brands for reliability and performance. 2. Embedded Safety Design – Space-saving layout
Ships to United States
MEM 16in x 20in Full-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-MEM-TQB4050
MEM 16in x 20in Full-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy-duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best possible
Ships to United States
