Cart 
Order Tracking
Original EFR ES150 Power Supply with PFC Function, for F6, F8, F10, ZS1650, ZS1850 CO2 Sealed Laser Tube
Item Code: CS-PS-ES150
.3V) G Signal ground This terminal must be connected with outer shell and control board of machine properly IN Power signal Laser power control terminal, control with 0-5V analog signal or 5V PWM signal 5V Output 5V output, max output current is 20mA Advantages: Application: Es-150
Ships to United States
Loop Rubber Timing Belt 300-3M for CO2 Laser Cutter, 15mm Width and 300mm Length, Pitch 3mm
Item Code: CS-BLT-300-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 300mm Sleeve Width: 450mm Teeth No.: 100mm
Ships to United States
Loop Rubber Timing Belt 384-3M for CO2 Laser Cutter, 15mm Width and 384mm Length, Pitch 3mm
Item Code: CS-BLT-384-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 384mm Sleeve Width: 450mm Teeth No.: 128mm
Ships to United States
MEM 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ4050
MEM 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy -duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best
Ships to United States
Original RECI P12 Power Supply with Digital Display Intelligent for RECI S2 / W2 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P12
machine’s control board • Temperature/Humidity Detection: self~protection starts when temperature or humidity is over permit value to ensure the safety of laser operation • Working Status Detection: monitor electrical signal from laser tube in time and analyze its working status &bull
Ships to United States
Loop Rubber Timing Belt 327-3M for CO2 Laser Cutter, 15mm Width and 327mm Length, Pitch 3mm
Item Code: CS-BLT-327-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 327mm Sleeve Width: 450mm Teeth No.: 109mm
Ships to United States
US Stock-Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100-US
), laser on when low level(≤0.3V) G Signal ground This terminal must be connected with outer shell and control board of machine properly IN Power signal Laser power control terminal, control with 0-5V analog signal or 5V PWM signal 5V Output 5V output, max output current is 20mA Advantages
Ships to United States
US Stock MEM 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ4050-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: MEM 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press
Ships to United States
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P14
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V Description P14, wideband and wide volt input, multi protections, the input could show the signal detection, the electric signal of machine tool control card as well as the fault analysis of
Ships to United States
Original RECI P16 Power Supply with Digital Display Intelligent for RECI S6 / W6 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P16
Original RECI P16 Power Supply with Digital Display Intelligent for RECI S6 / W6 CO2 Laser Tube, 90V -250V Description: P16, Function Features: The power supply is capable to monitor the working condition of laser machine tool in real time, analyze the problem intelligently and provide solution to
Ships to United States
Original RECI P18 Power Supply with Digital Display Intelligent for RECI S8 / W8 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P18
tube in real time, analyzing automatically the faults of machine tool and laser tube and showing them on the screen in different languages. P18 matches to Reci S8 laser tube. Features • Wide Input Range (90v~250v): it equals to put a voltage regulator and stabilizer in power supply, which can be
Ships to United States
US Stock,CALCA 51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate
Item Code: LCM-DR-1390-130W-US
_130w_co2_laser_cutter_with_auto_focus_function_fda_certificate.html CALCA 51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate The machine is a laser engraver and cutter equipped with 130W CO2 Laser Tube. It is used to engrave on wood, bamboo, Plexiglas, crystal
Ships to United States
US Stock, Qomolangma 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-QD2-6040-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Qomolangma 24" x 16" 16in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Ships to United States
A3 16.5in x 11.7in No Cut Laser Dark Heat Transfer Paper, A+B Paper (Each for 100 Sheets)
Item Code: HTPL-AB-A3-100SET
too hard. 3. Do not use bleach or alkaline detergent to wash. 4. Do not dry clean, do not tumble dry, just let dry naturally. 5. Do not soak in water for a long time, otherwise the image color may run. 6.The washing machine is fully automatic, should use cold water, cleaning time should be less than
Ships to United States
US Stock CALCA 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-CALCA-TQ4050-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: CALCA 16" x 20" Semi-Automatic Pneumatic Double Station Heat
Ships to United States
MEM 220V 4KW 20in x 27.5in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ5070
MEM 220V 4KW 20in x 27.5in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy -duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best
Ships to United States
A4 8.3in x 11.7in No Cut Laser Dark Heat Transfer Paper, A+B Paper (Each for 100 Sheets)
Item Code: HTPL-AB-A4-100SET
not rub the image too hard. 3. Do not use bleach or alkaline detergent to wash. 4. Do not dry clean, do not tumble dry, just let dry naturally. 5. Do not soak in water for a long time, otherwise the image color may run. 6.The washing machine is fully automatic, should use cold water, cleaning time
Ships to United States
MEM 220V 4KW 20in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ5060
MEM 220V 4KW 20in x 24in Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy -duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best
Ships to United States
MEM 6" x 6" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ-1515
MEM 6" x 6" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy-duty solid industrial grade pressing framework with high quality electric components. This provides the operator with the best
Ships to United States
