Cart 
Order Tracking
CVD ZnSe Focus Lens Dia. 18mm FL 38.1mm / 50.8mm / 63.5mm for CO2 Laser Engraving and Cutting Machine
Item Code: CS-FL-BL18
lens for a CO2 engraver or laser cutter, to focus the beam into a tight spot. This lens is NEW in the original FACTORY BOX and is untouched. You get an unopened box. Note: Please choose the focus length when you make an order. Features: Diameter: 0.7" (18mm) Focal Length: 1.5" (38.1mm
Ships to United States
Loop Rubber Timing Belt 384-3M for CO2 Laser Cutter, 15mm Width and 384mm Length, Pitch 3mm
Item Code: CS-BLT-384-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 384mm Sleeve Width: 450mm Teeth No.: 128mm
Ships to United States
Ving Hand-held Fiber Laser Welding Machine, with 2 Optical Path DH-500W-S for Channel Letter
Item Code: LWM-DH-500W-S
. 6. Capable of partial heating process. 7. Able to deal with complex, profiled, or tiny letters. 8. Low noise and no pollution. 9. Ultrafine locating rod makes corner welding easier without changing spot position 10. Latest adapted 7’ touch screen control panel makes operation more convenient
Ships to United States
MEM 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ4050
included) 8.Includes teflon sheet on the heat palte. 9.Table and bottom stand included. 10.Laser Positioning System included. 11.Lifetime factory on-line service. Specifications: Voltage and power :220V/2700W/13A or 110V /1800W/17A Check voltage at back side of the head Time Range: 0-999sec. Max. Temp
Ships to United States
Original RECI P12 Power Supply with Digital Display Intelligent for RECI S2 / W2 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P12
machine’s control board • Temperature/Humidity Detection: self~protection starts when temperature or humidity is over permit value to ensure the safety of laser operation • Working Status Detection: monitor electrical signal from laser tube in time and analyze its working status &bull
Ships to United States
Loop Rubber Timing Belt 327-3M for CO2 Laser Cutter, 15mm Width and 327mm Length, Pitch 3mm
Item Code: CS-BLT-327-3M-15
Description: Belt using Japan imported high quality synthetic neoprene,and match into many different uses of rubber materials; Skeleton materials imported from Japan for high quality glass fiber cord; Tooth surface with nylon 66 high stretch do protection. The synchronous belt with teeth with tooth mesh to transfer power, it is a new type of synchronous transmission mode.And, Products do not need lubrication ,no slip ,no pollution, less noise; The transmission efficiency of more than 98%, speed ratio range can reach 1:10, Allow linear velocity can be up to 50 m/s, transmission rate from hundreds of tile to hundreds of kw, still apply multiple spindle drive. Product dynamic bending wind give performance and fatigue performance are good, Ozone good performance, but also has aging heat resisting abrasion characteristics. Pitch Length: 327mm Sleeve Width: 450mm Teeth No.: 109mm
Ships to United States
Ving Hand-held Fiber Laser Welding Machine, with 2 Optical Path DH-350W-S for Channel Letter
Item Code: LWM-DH-350W-S
. 6. Capable of partial heating process. 7. Able to deal with complex, profiled, or tiny letters. 8. Low noise and no pollution. 9. Ultrafine locating rod makes corner welding easier without changing spot position 10. Latest adapted 7’ touch screen control panel makes operation more convenient
Ships to United States
US Stock, 400W Mould Laser Welding Machine Welding Different Sorts of Steel as Used for Making Molds
Item Code: LWM-CY-WY400A-US
The Products in US Stock Only Free Shipping to USA, Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: 400W Mould Laser Welding Machine Welding Different Sorts of Steel as
Ships to United States
US Stock-Original EFR ES100 Power Supply with PFC Function, for F4, ZS1450 CO2 Sealed Laser Tubes
Item Code: CS-PS-ES100-US
efficiency, rapid response speed and simple port control, and applicable to two signals – high and low level. TTL level is to control the laser on/off, in the meantime, the power supply has an anomalistical protective switch to check whether the outer water and air, etc. Features: 1.Initiative PFC
Ships to United States
US Stock MEM 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System
Item Code: HTM-TQ4050-US
with Laser Positioning System US Stock MEM 16" x 20" Semi-Automatic Pneumatic Double Station Heat Press with Laser Positioning System The design of the MEM double station presses combines a heavy -duty solid industrial grade pressing framework with high quality electric components. This
Ships to United States
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V
Item Code: CS-PS-P14
Original RECI P14 Power Supply with Digital Display Intelligent for RECI S4 / W4 CO2 Laser Tube, 90V - 250V Description P14, wideband and wide volt input, multi protections, the input could show the signal detection, the electric signal of machine tool control card as well as the fault analysis of
Ships to United States
Original RECI P16 Power Supply with Digital Display Intelligent for RECI S6 / W6 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P16
water protection. ⑧ It is not proposed to control laser power with high~frequency modulation, because it will have impact on the service life of the laser. ⑨ The model is applicable to Z2 laser tube, it is necessary to regulate and use the current according to the laser instructions. ⑩The ammeter is
Ships to United States
Original RECI P18 Power Supply with Digital Display Intelligent for RECI S8 / W8 CO2 Laser Tube, 90V -250V
Item Code: CS-PS-P18
Original RECI P18 Power Supply with Digital Display Intelligent for RECI S8 / W8 CO2 Laser Tube, 90V -250V Description P18, Function features: Wideband and wide volt input, multi protections, showing the electric signal of machine tool control card, monitoring the feedback electric signal of laser
Ships to United States
50W CO2 Laser Engraving Machine 12" x 20" Work Table with Y-axis Rotary Roller
Item Code: LCM-KH-5030-50W
kinds of switch buttons arranged neatly, more convenient for your control. High quality Laser Power Supply And Control System Power is stable, strong adaptability, fast response speed, suitable for cutting or engraving. Sample:
Ships to United States
11" x 19" (300mm x 500mm) CO2 Laser Cutting and Engraving Machine with double side open door
Item Code: LCM-RS-M3050
11" x 19" (300mm x 500mm) CO2 Laser Cutting and Engraving Machine with double side open door Description: M3050 CO2 laser machine offer a portable desktop solution for high quality cutting and engraving of acrylics, cardboard, wood, textiles, two-color sign laminate, stones and much more
Ships to United States
US Stock 50W CO2 Laser Engraving Machine 12" x 20" Work Table with Y-axis Rotary Roller
Item Code: LCM-KH-5030-50W-US
. High quality Laser Power Supply And Control System Power is stable, strong adaptability, fast response speed, suitable for cutting or engraving. Sample:
Ships to United States
US Stock, All-In-One Design 30W Fiber Laser Marking Machine, Free Computer with Pre-installed EZCAD Software
Item Code: LMM-ED-F30-US
The ED-F30 has an all-in-one design, with fiber laser, galvanometer, Accessory axis, control system, industrial PC included and integrated, and provides a working table for users. With this design, the ED-F30 achieves low failure rate, low maintenance cost, and ease of use and maximum productivity
Ships to United States
US Stock,CALCA 51" x 35" 130W CO2 Laser Cutter with Auto - focus Function, FDA Certificate
Item Code: LCM-DR-1390-130W-US
, CorelDraw, AutoCAD, Photoshop, etc. Laser / PC Connectivity USB, Ethernet connection Graphic Format Supported Files CorelDraw Identify (BMP, JPEG, AI, PLT etc.) Color Separation Up To 256 Colors Cooling Type Circulating Water Cooling and Protection System Control System RDC6445G controller
Ships to United States
