Cart 
Order Tracking
Vest Screen Full Color Led Advertising Vest Led Screen
Item Code: SIC-BY-002
Vest Screen Full Color Led Advertising Vest Led Screen Specification: Vest Color: Black Communication method: WIFI link mobile phone control Program support: text, pictures, animation Support points: 64X64 full color dot matrix screen Screen size: 27X27cm Power supply mode: charging treasure
Ships to United States
Special Screen Pringting Stretcher for Cambered Screen Plate
Item Code: SPM-TJ-SPE-3040
Special Screen Pringting Stretcher for Cambered Screen Plate This machine is specially used for stretching mesh of all kinds of screen plate that hat and mask printing machines produced by our company. Flexible cambered screen plate is soft, the normal stretcher can not be used; This stretcher is
Ships to United States
S&A CW-5000TG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 220-240V, 50Hz
Item Code: CW-5000TGTY
leave at least 8cm between obstructions and the side air inlet. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. Please pay attention to the effect of the condensate water!
Ships to United States
S&A CW-5000DG Industrial Water Chiller for Single 80W or 100W Engraving Machine, 6L Tank capacity, 750W Cooling Capacity, AC 1P 110V, 60Hz
Item Code: CW-5000DGTY
8cm between obstructions and the side air inlet. 5. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. 6. Please pay attention to the effect of the condensate water! With greater ambient
Ships to United States
S&A 3000DG Thermolysis Industrial Water Chiller for CO2 Glass Tube of Engraving Machine, AC 1P 110V, 60Hz
Item Code: CW-3000DGTY
CAUTIONS We are authorized as "S&A" brand name product agent. All of S&A water chillers are certified with design patent. Counterfeiting is not allowed, Please recognize S&A logo when you purchase S&A water chillers. Description S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. This Water Chiller has been sold largely to Europe, South America, Asia and other markets; Economic cooling equipment, easy to install and operate, compact and easily movable. Remarks: CW3000 water chillers are equipped high speed fans inside, NOT able to control the water temperature. Please confirm before place an order. The products are nonrefundable after selling, only if quality issue. Used for: It is designed for cooling the one CO2 glass laser tube under 80W of the laser engraving and cutting machine. (Its emitting rate is lower than 60%, you can choose CW5000 water Chiller if you want the emitting rate higher than 60 %.) Features： Specific disconnection alarm securing protection; High cost performance, low failure rate; Radiating Capacity is 50W / ℃; Forces circulation, 9L cooling tank capacity; It can extend the using life of laser tube and ensure the engraving effect better. Comprehensive reference to the international radiator - type cooling system; Small thermolysis water cooler; With completed water flow and over high temperature alarm functions; Professional forced air - cooled radiator; CW-3000 Laser Water Chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; High heat dissipating capacity and not easy to be blocked. SPECIFICATION Model CW-3000DGTY Voltage AC 1P 110V Frequency 50/60Hz Current 0.4~0.9A Machine power 0.07kW Radiating capacity 50W/℃ Pump pressure 1bar Max.flow 10L/min N.W 9Kgs(19.8lb) G.W 11 Kgs(24.3lb) Protection flow alarm Tank capacity 9L Inlet and outlet OD 10mm barbed connector Dimension 49cm x 27cm x 38cm (19.3" x 10.6" x 15") Package dimension 55cm x 34cm x 43cm (23.2" x 15.4" x 18.9") CONTOUR AND PARTS INTRODUCTION Independent production of sheet metal and heat exchanger . 9L cooling tank, fast cooling. Adopt IPG fiber laser for welding and cutting sheet metal, adopt minimize risks of water and refrigerant leakage and improve quality Digital temperature display The digital temperature display is able to indicate water temperature and alarm codes. Ease of moving and water filling. The firm handle can help move the water chillers easily. Inlet and outlet connector equipped. Multiple alarm protection. The laser will stop working once it receives alarm signal from the water chiller for protection purpose. High speed fan The high speed fan is installed to ensure high cooling performance. Easy water draining It is suggested to replace the cooling water(distilled water or purified water as cooling water) every 3 to 6 months. Connection diagram between water chiller and laser machine Water outlet of the water tank connects to water inlet of the laser machine while water inlet of the water tank connects to water outlet of the laser machine. Aviation connector of the water tank connects to the aviation connector of the laser machine. FLOW ALARM AND OUTPUT PORTS In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-3000series water cooler possess a low flow alarm protection. (1) Flow alarm output ports and the wiring diagram (2) ALARM DESCRIPTION Causes of the cooling water circulation alarm and the working condition table Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V. MAINTENANCE Method of exchanging water in the water tank and the exchanging frequency Method of exchanging water in the water tank Drain the waste water out of the water tank through the drain outlet and fill the clean water into the tank through the filling hole Exchanging Frequency The purified water should be exchanged once a month and the running water should be exchange twice a month. The quality of the circulating water will directly influence the service life the laser tube.It is recommended to use purified water. Application S&A CW-3000 chiller for 3KW CNC spindle machine S&A CW-3000 water cooler for 60W co2 laser machine S&A CW-3000 chiller for dual 1.5KW engraving machine S&A CW-3000 chiller for 80W co2 laser cutting machine S&A CW-3000 chiller for acrylic laser cutting machine Certificate With 11 patent certificates and won Quality integrity Level A certificate; ISO 9001, CE, RoHS and REACH environmental certificated. Conforms to air transport requirements, energy saving and environment friendly. Warehouse 18,000 square meters brand new industrial refrigeration system research center and production base ，Strictly execute ISO production management system, using mass modularized standard produces, and standard parts rate up to 80% which are the source of quality stability. Annual production capacity of 60,000 units, focus on large, medium and small power chiller production and manufacture. Test System With excellent laboratory testing system, simulates actual working environment for chiller. Overall performance testing before delivery: aging test and complete performance test must be executed on each finished chiller. Installation It is very simple to install this industrial cooling machine. The first time installation of the new machine can be carried out by following steps. Open the package to check if the machine is intact and all the necessary accessories are completed. Open the injection port to feed cooling water. (Do not let the water spill over!) According to system conditions, please connect the water inlet and outlet pipe well. Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. Check the water level of the water tank again. (It should be 80-150cm from the surface of water to the injection port) Cautions Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Please make sure there is stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 210 ~ 240V (110V model is of 100 ~120V). If you do need a wider operating voltage range, customization is available for us. Unmatched power frequency can cause the chiller damage! Please choose model of 50Hz or 60Hz according to actual circumstance. To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. To drain through circulating pump is strictly prohibited! Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. The cooling water must be drained if the cooler is out of use for long time or before being transported. To protect laser heating devices , the radiator fan of cooler will suspend to work when water temperature is lower ( about 10℃ ) , and it will restart to run when water temperature rises to higher ( about 20 ℃). Troubleshooting Failure Failure Cause Approach Machine turned on but unelectrified Power cord is not plugged in place fuse burnt-out Plug the power cord in place Replace the fuse inside the power interface which is in the back of machine Flow alarm (panel red light) with water pipe directly connect to the outlet, inlet, there is no water flow Water level in the storage water tank is too low Feed water and check the pipe leakage When used with the device, flow alarm (panel red light), but a direct connection with the pipe outlet and inlet, there is water flowing but not alarming Blockage in circulating water pipeline Check circulating water pipeline Ultra-high temperature Chiller of poor ventilation Excessive heat load To improve the ventilation Reduce the heat load or to use other models A normal boot, but the fan does not work The water temperature below 20 degrees A normal phenomenon, no processing Switch on with alarming after adding water or changing water Water drop in electric circuit Damaged pumps dry transfer Natural drying or drying off cap To replace or repair water pumps,prohibited anhydrous boot Slow outfall drainage The injection port is not open Open the injection port
Ships to United States
460*325mm (18" x 12.7") Perfect Binding Machine(Dust-free Spine Roughening Unit & Heating Panel)
Item Code: SIC-HY-S460DH
, switch them fast. Characteristics: • Heating type of individual nipping bar. • Drawing type of regulating boards for paper/jeweled binding. Applications: It is the ideal machine for producing books with either soft or hard covers, in the office, copy shop or small print room. Quality
Ships to United States
ALLWIN DX5 Capping Unit for E-160 / E-180 / E-180UV / E-320 / E-320 UV Printers
Item Code: ACC-OT-052
ALLWIN DX5 Capping Unit for E-160 / E-180 / E-180UV / E-320 / E-320 UV Printers Printer Compatibility: ALLWIN E-160UV Roll / E-180 / E-180UV / E-320 / E-320UV Printers Manufacturer: Ving Parts Net Weight: 15g/pc Packing Size: 2.4" x 2.0" x 1.4"(60 x 50 x 35mm) Gross Weight
Ships to United States
S&A RMUP-500AI 6U Rack Mount Industrial Chiller Unit for Cooling 10W-15W UV Lasers Ultrafast Laser
Item Code: CW-RMUP-500AI
S&A RMUP-500 6U Rack Mount Industrial Chiller Unit for Cooling 10W-15W UV Lasers Ultrafast Laser TEYU rack mount water chiller RMUP-500 features a 6U rack mount design and is perfect for 10W-15W UV laser and ultrafast laser applications. Mountable in a 6U rack, this industrial water cooling
Ships to United States
S&A RMUP-500 BI 6U Rack Mount Industrial Chiller Unit for Cooling 10W-15W UV Lasers Ultrafast Laser
Item Code: CW-RMUP-500BI
S&A RMUP-500 6U Rack Mount Industrial Chiller Unit for Cooling 10W-15W UV Lasers Ultrafast Laser TEYU rack mount water chiller RMUP-500 features a 6U rack mount design and is perfect for 10W-15W UV laser and ultrafast laser applications. Mountable in a 6U rack, this industrial water cooling
Ships to United States
Sublimation Coating Blank Crystal Heart Shape Screen
Item Code: CS-CY-BXP13
the crystal? 1. Print your design by colorful desktop printer onto the coated side of sublimation paper using sublimation ink (no mirroring required). 2. Place the ink-side of the paper firmly against the white surface of the crystal and secure with heat-resistant tape if necessary. 3
Ships to United States
Sublimation Coating Blank Crystal Triangle Screen
Item Code: CS-CY-BSJ11
family photos, as a gift, company logo, etc. How to transfer on the crystal? 1. Print your design by colorful desktop printer onto the coated side of sublimation paper using sublimation ink (no mirroring required). 2. Place the ink-side of the paper firmly against the white surface of the
Ships to United States
3 Units Smax 31 Screen(Frame Only)
Item Code: SIC-SMAX-31-12
Description: 1.Convenient type, tear open outfit simple. 2.The fashion appearance, flexible size. 3.The frame body USES the aluminum extrusions, parts adopt high strength ABS. 4.Adjustable telescopic, nimble convenient. 5.Can be used alone, it has better effect to use multi-cell joint. Applications: Suitable for hotel arrangement, small conference and exhibition, 4 s shops, real estate, shopping malls, chain stores and other kinds of indoor Spaces.
Ships to United States
1-1 Micro Adjustable Screen Press Head
Item Code: SPM-TJ-006321
have well installed it or not. 4. Adjust the screen plate with its micro adjusting functions, then apply it into printing process. Parameters: Printing Head Weight: 9.7kg(22lb) Machine Size: 46*20*27.5cm Function: micro adjust/matching color Packing Size: 47.5*21.5*29.5cm (19"*9"*12"
Ships to United States
3 Units Smax 31 Screen(Graphic Included)
Item Code: SIC-SMAX-31-12G
Description: 1.Convenient type, tear open outfit simple. 2.The fashion appearance, flexible size. 3.The frame body USES the aluminum extrusions, parts adopt high strength ABS. 4.Adjustable telescopic, nimble convenient. 5.Can be used alone, it has better effect to use multi-cell joint. Applications: Suitable for hotel arrangement, small conference and exhibition, 4 s shops, real estate, shopping malls, chain stores and other kinds of indoor Spaces.
Ships to United States
Dark K Waterbase Ink for Screen Film
Item Code: PGI-SCREEN-EPSON-K
Description: This is Dark K pigment wanter-base ink for screen film inkjet printing. Color: only dark K Volume: 500ml/bottle
Ships to United States
LED Screen Dynamic Backpack Portable Led Advertise Bag Mobile Billboards Screen
Item Code: SIC-BY-001
LED Screen Dynamic Backpack Portable Led Advertise Bag Mobile Billboards Screen Specification: Support points: 64X64 full color dot matrix screen Program support: text, pictures, animation Communication mode: WIFI link mobile phone control Backpack size 30X14X44cm Rated voltage: 5V Power supply
Ships to United States
5L Digital Textile Printing Pretreatment
Item Code: DTG-HH-PPA
5L Digital Textile Printing Pretreatment Description: Product: Pre coating for textile ink use with: For textile ink Combination of water + concentrate pretreatment：light tshirt：1:(10-15);light tshirt：1:(10-15);dark tshirt:1:(2-3) Color: Natural MOQ: 1 set DTG Solution: Package: Gross Weight: 5
Ships to United States
Flock Heat Transfer Printing Paper
Item Code: SIT-HTP-ZR-01
It's easy to operate with great effect It can be cut any shape and letter by cutting plotter Description: The film can be cut kinds of letters, numbers and any other shapes by Vinyl Cutter. Logos could be cut and transferred on T-shirts and caps by heat press machine. The texture of transfered has the feeling of plush. The film The film is widely used for personal T-shirts, caps, sports clothes, uniform clothes, advertising shirts, color flags or mass production. Specs: Size:37*52cm Flocking height: 0.7mm Remark: Pictures have off color, please in kind prevail. Application:
Ships to United States
US Stock S&A RMUP-500 BI 6U Rack Mount Industrial Chiller Unit for Cooling 10W-15W UV Lasers Ultrafast Laser
Item Code: CW-RMUP-500BI-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: S&A RMUP-500 BI 6U Rack Mount Industrial Chiller Unit for
Ships to United States
HD-U62 LED Screen Control Card U-Disk Controller Card
Item Code: LED-KZK-HD-U62
U62 is a U-disk series control card, through the USB port to update the program. Cost-effective, simplesoftware to operate, better and richdisplay effect, supported variety of monochrome display. Product name: HD-U62 LED Screen Control Card U-Disk Controller Card Single color: 512*64. 1536*16
Ships to United States
3 Yards 140 Mesh 50Inches Width Silk Screen Fabric 55T
Item Code: SPM-TJ-55T-50-3Y
140 Mesh Silk Screen Printing Mesh Specification: Material: 100% Monofilament Polyester Weave Type: Plain Weave 1:1 Width: 50" Length: 108" Color: white This kind of mesh is plain weaved polyester mono-filament yarn. The characters of this mesh contain high strength, low elongation
Ships to United States
