Cart 
Order Tracking
Sample-AC110V No Power Supply Required SMD 2835 IP67 Waterproof LED Module (3 LEDs, 2.5W,L110 x W28 x H8.5mm White Light)
Item Code: LEDM-GKL-MFW8B0D-SP-110V
AC110V No power supply required SMD 2835 IP67 Waterproof LED Module (3 LEDs, 2.5W, L110 x W28 x H8.5mm White Light) Description: 1, The application of high quality light source module, with high brightness, color uniformity, characteristics of antistatic ability etc.; 2, AC110V 50Hz/60Hz power supply, the power factor of 0.92 or more, Effectively reduce the power loss and improve the efficiency of the power grid; 3, Appearance, configuration of 155 degree lens cloth lamp using fewer lighting uniformity; 4, Circuit design comes with constant current, over temperature, short circuit protection function; 5, The module uses the fireproof material, flame retardant grade can reach U94V-0, protection grade IP67; 6, To the power module, wireless loss, no pressure drop, single lamp can be cut, easy to install, fast; 7, The product through the CE, RoHS, LM80, IP67 and other certification. Application sites: suitable for 10-35cm advertising signs, advertising light boxes, etc. Product installation and use should be noted: (1). Module single lamp can be cut, the work of AC voltage: AC100, AC110V, AC220V, 50/60HZ. (2). Power line using 2x1.5mm above empty cable (according to the load current power line selection), if the module power line had to be lengthened to choose the wires of 0.75mm above it /18# specifications, in order to avoid overload leads to power cord fever, lead to adverse consequences. (3). When the connection module short, first with oblique mouth clamp center cut two module of power line, decortication 30mm or so, peel wire 10mm and the corresponding color (red and white line is connected with a live wire L, the white line is connected to the zero line n) wire twisted into a stock, then the special waterproof tape insulation waterproof processing, final inspection power wiring head guide continuity and reliability, be the unarmed cannot supply line from pull the wiring head that is appropriate. (4). Module installed first module at the bottom of the gum from the paper tore affixed to or advertising light boxes mark preliminary fixed, then the 1 single ST2.5x10mm tapping screw locking reinforcement, the module both sides of glass glue fixed; (5) the end of the module is not connected to the module, the use of the special waterproof cap which we need to support; (6). The standard module cascaded 50PCS, maximal cascaded 100PCS, do not avoid excessive connection, line load current is too large and damaged products; (7) if the module is used outdoors, it is necessary to lock the nut in the terminal in the terminal interface, otherwise it will affect the waterproof effect; (8). Module can not be completely exposed in the outdoor use, touch not electrified, live working, module cut wire, thread cannot be completely naked, must do waterproofing treatment, to prevent electric shock; Note: * this product is forbidden to work at the non selected voltage and to ensure that the work is at the selected voltage 50/60HZ. Details: Product size(mm): Distribution curve flux and Light spot image: Usages: Please download our pdf file to learn more. Product installation and use should be noted: 1. Module single lamp can be cut, the work of AC voltage: AC110V 2. Power line using 2x1.5mm above empty cable (according to the load current power line selection), if the module power line had to be lengthened to choose the wires of 0.75mm above it, in order to avoid overload leads to power cord fever, lead to adverse consequences. 3. When the connection module short, first with oblique mouth clamp center cut two module of power line, decortication 30mm or so, peel wire 10mm and the corresponding color (red and white line is connected with a live wire L, the white line is connected to the zero line n) wire twisted into a stock, then the special waterproof tape insulation waterproof processing, final inspection power wiring head guide continuity and reliability, be the unarmed cannot supply line from pull the wiring head that is appropriate. 4. Module installed first module at the bottom of the gum from the paper tore affixed to or advertising light boxes mark preliminary fixed, then the 1 single ST2.5x10mm tapping screw locking reinforcement, the module both sides of glass glue fixed. 5. The end of the module is not connected to the module, the use of the special waterproof cap which we need to support. 6. The standard module cascaded 50PCS, maximal cascaded 100PCS, do not avoid excessive connection, line load current is too large and damaged products. 7. If the module is used outdoors, it is necessary to lock the nut in the terminal in the terminal interface, otherwise it will affect the waterproof effect. 8. Module can not be completely exposed in the outdoor use, touch not electrified, live working, module cut wire, thread cannot be completely naked, must do waterproofing treatment, to prevent electric shock. Note: this product is forbidden to work at the non selected voltage and to ensure that the work is at the selected voltage 50/60HZ Installation diagram: Application: Quality Report:
Ships to United States
Sample-Ving No Power Supply Required IP67 Waterproof Side- Light LED Module, AC220V (3 LEDs, 3W, L75 x W45 x H20mm White Light)
Item Code: LEDM-GKL-MNW8A9D-SP-220V
Description: 1. Adopt high quality LED as light source,high brightness,uniform lighting,good Antistatic; 2. AC220v input;P.F>0.9; 3. Nice design with 12*55°optical lens; 4. Circuit design with constant current, over-temperature and short circuit protection function; 5. Use fire-resistant material, fireproof up to U94V-0 and waterproof up to IP67; 6. No need power supply; no wiring loss; no voltage-dropping; single cuttable; easy installation; 7. Certificate : UL, CE, Rohs, LM80, IP67 Specifications: Size(mm) 88*21.5*11.1 Description Constant current, Customized LM80 hi-voltage LED; SDCM<4; Fuse inside, Waterproof IP67, Fireproof 94V-0; Over load, short circuit and over temperature protection, ABS injection,12*50°, IP67, 7000-7500K, 6000-6500K, 20pcs/string LED Type&Qty Genesis Voltage 220VAC Power (W) 3W Power (W) 280 Central distance (mm) 200 Wire UL1672 AWG18& UL1672 AWG22 L=160.0mm Cut Each 2pcs Application 12～35cm Double side box&Single box View angle 12*50° Voltage: AC220V 60Hz Color: White Power: 3W Material: Double insulated cable Lumens: 285lm Weight(50PCS): 860g Beam angle: 12x50° Connection Qty: 20PCS/ string（single cutaable） PF: ＞0.9 Fixing Screw: M3 screw LED Qty: 1PCS Tape: 3M VHB backing tape CCT: WHITE Working Temp.: -20~55℃ Luminous efficacy: 95lm/w Storage Temp.: -40~80℃ IP rate: IP67 Warranty: 5 years Application: Advertising sign with 120-350mm and lighting box etc Products comply with UL certification standards, more energy saving, higher brightness, more stable. Warm tips: Free shipping on order over 288usd in 25 areas: Puerto Rico, Canada, France, England, America, Australia, Germany, Japan, Thailand, Belgium, Spain, Maldives, Philippines, Russia, South Korea, India, Malaysia, Singapore, Indonesia, Vietnam, Cambodia, Greek, Israel, Pakistan.
Ships to United States
Sample-AC120V No Power Supply Required SMD 2835 IP67 Waterproof LED Module (3 LEDs, 2.5W,L110 x W28 x H8.5mm White Light)
Item Code: LEDM-GKL-MFW8A2D-SP-120V
AC120V No power supply required SMD 2835 IP67 Waterproof LED Module (3 LEDs, 2.5W,L110 x W28 x H8.5mm White Light) Description: 1, The application of high quality light source module, with high brightness, color uniformity, characteristics of antistatic ability etc.; 2, AC120V 50Hz/60Hz power supply, the power factor of 0.92 or more, Effectively reduce the power loss and improve the efficiency of the power grid; 3, Appearance, configuration of 155 degree lens cloth lamp using fewer lighting uniformity; 4, Circuit design comes with constant current, over temperature, short circuit protection function; 5, The module uses the fireproof material, flame retardant grade can reach U94V-0, protection grade IP67; 6, To the power module, wireless loss, no pressure drop, single lamp can be cut, easy to install, fast; 7, The product through the CE, RoHS, LM80, IP67 and other certification. Application sites: suitable for 10-35cm advertising signs, advertising light boxes, etc.. Product installation and use should be noted: (1). Module single lamp can be cut, the work of AC voltage: AC100, AC110V, AC220V, 50/60HZ. (2). Power line using 2x1.5mm above empty cable (according to the load current power line selection), if the module power line had to be lengthened to choose the wires of 0.75mm above it /18# specifications, in order to avoid overload leads to power cord fever, lead to adverse consequences. (3). When the connection module short, first with oblique mouth clamp center cut two module of power line, decortication 30mm or so, peel wire 10mm and the corresponding color (red and white line is connected with a live wire L, the white line is connected to the zero line n) wire twisted into a stock, then the special waterproof tape insulation waterproof processing, final inspection power wiring head guide continuity and reliability, be the unarmed cannot supply line from pull the wiring head that is appropriate. (4). Module installed first module at the bottom of the gum from the paper tore affixed to or advertising light boxes mark preliminary fixed, then the 1 single ST2.5x10mm tapping screw locking reinforcement, the module both sides of glass glue fixed; (5) the end of the module is not connected to the module, the use of the special waterproof cap which we need to support; (6). The standard module cascaded 50PCS, maximal cascaded 100PCS, do not avoid excessive connection, line load current is too large and damaged products; (7) if the module is used outdoors, it is necessary to lock the nut in the terminal in the terminal interface, otherwise it will affect the waterproof effect; (8). Module can not be completely exposed in the outdoor use, touch not electrified, live working, module cut wire, thread cannot be completely naked, must do waterproofing treatment, to prevent electric shock; Note: * this product is forbidden to work at the non selected voltage and to ensure that the work is at the selected voltage 50/60HZ. Details: Product size(mm): Distribution curve flux and Light spot image: Usages: Please download our pdf file to learn more. Product installation and use should be noted: 1. Module single lamp can be cut, the work of AC voltage: AC120V 2. Power line using 2x1.5mm above empty cable (according to the load current power line selection), if the module power line had to be lengthened to choose the wires of 0.75mm above it, in order to avoid overload leads to power cord fever, lead to adverse consequences. 3. When the connection module short, first with oblique mouth clamp center cut two module of power line, decortication 30mm or so, peel wire 10mm and the corresponding color (red and white line is connected with a live wire L, the white line is connected to the zero line n) wire twisted into a stock, then the special waterproof tape insulation waterproof processing, final inspection power wiring head guide continuity and reliability, be the unarmed cannot supply line from pull the wiring head that is appropriate. 4. Module installed first module at the bottom of the gum from the paper tore affixed to or advertising light boxes mark preliminary fixed, then the 1 single ST2.5x10mm tapping screw locking reinforcement, the module both sides of glass glue fixed. 5. The end of the module is not connected to the module, the use of the special waterproof cap which we need to support. 6. The standard module cascaded 50PCS, maximal cascaded 100PCS, do not avoid excessive connection, line load current is too large and damaged products. 7. If the module is used outdoors, it is necessary to lock the nut in the terminal in the terminal interface, otherwise it will affect the waterproof effect. 8. Module can not be completely exposed in the outdoor use, touch not electrified, live working, module cut wire, thread cannot be completely naked, must do waterproofing treatment, to prevent electric shock. Note: this product is forbidden to work at the non selected voltage and to ensure that the work is at the selected voltage 50/60HZ Installation diagram: Application: Quality Report:
Ships to United States
Sample-AC100V No Power Supply Required SMD 2835 IP67 Waterproof LED Module (3 LEDs, 2.5W,L110 x W28 x H8.5mm White Light)
Item Code: LEDM-GKL-MFW8A1D-SP-100V
AC100V No power supply required SMD 2835 IP67 Waterproof LED Module (3 LEDs, 2.5W, L110 x W28 x H8.5mm White Light) Description: 1, The application of high quality light source module, with high brightness, color uniformity, characteristics of antistatic ability etc.; 2, AC100V 50Hz/60Hz power supply, the power factor of 0.92 or more, Effectively reduce the power loss and improve the efficiency of the power grid; 3, Appearance, configuration of 155 degree lens cloth lamp using fewer lighting uniformity; 4, Circuit design comes with constant current, over temperature, short circuit protection function; 5, The module uses the fireproof material, flame retardant grade can reach U94V-0, protection grade IP67; 6, To the power module, wireless loss, no pressure drop, single lamp can be cut, easy to install, fast; 7, The product through the CE, RoHS, LM80, IP67 and other certification. Application sites: suitable for 10-35cm advertising signs, advertising light boxes, etc.. Product installation and use should be noted: (1). Module single lamp can be cut, the work of AC voltage: AC100, AC110V, AC220V, 50/60HZ. (2). Power line using 2x1.5mm above empty cable (according to the load current power line selection), if the module power line had to be lengthened to choose the wires of 0.75mm above it /18# specifications, in order to avoid overload leads to power cord fever, lead to adverse consequences. (3). When the connection module short, first with oblique mouth clamp center cut two module of power line, decortication 30mm or so, peel wire 10mm and the corresponding color (red and white line is connected with a live wire L, the white line is connected to the zero line n) wire twisted into a stock, then the special waterproof tape insulation waterproof processing, final inspection power wiring head guide continuity and reliability, be the unarmed cannot supply line from pull the wiring head that is appropriate. (4). Module installed first module at the bottom of the gum from the paper tore affixed to or advertising light boxes mark preliminary fixed, then the 1 single ST2.5x10mm tapping screw locking reinforcement, the module both sides of glass glue fixed; (5) the end of the module is not connected to the module, the use of the special waterproof cap which we need to support; (6). The standard module cascaded 50PCS, maximal cascaded 100PCS, do not avoid excessive connection, line load current is too large and damaged products; (7) if the module is used outdoors, it is necessary to lock the nut in the terminal in the terminal interface, otherwise it will affect the waterproof effect; (8). Module can not be completely exposed in the outdoor use, touch not electrified, live working, module cut wire, thread cannot be completely naked, must do waterproofing treatment, to prevent electric shock; Note: * this product is forbidden to work at the non selected voltage and to ensure that the work is at the selected voltage 50/60HZ. Details: Product size(mm): Distribution curve flux and Light spot image: Usages: Please download our pdf file to learn more. Product installation and use should be noted: 1. Module single lamp can be cut, the work of AC voltage: AC100V 2. Power line using 2x1.5mm above empty cable (according to the load current power line selection), if the module power line had to be lengthened to choose the wires of 0.75mm above it, in order to avoid overload leads to power cord fever, lead to adverse consequences. 3. When the connection module short, first with oblique mouth clamp center cut two module of power line, decortication 30mm or so, peel wire 10mm and the corresponding color (red and white line is connected with a live wire L, the white line is connected to the zero line n) wire twisted into a stock, then the special waterproof tape insulation waterproof processing, final inspection power wiring head guide continuity and reliability, be the unarmed cannot supply line from pull the wiring head that is appropriate. 4. Module installed first module at the bottom of the gum from the paper tore affixed to or advertising light boxes mark preliminary fixed, then the 1 single ST2.5x10mm tapping screw locking reinforcement, the module both sides of glass glue fixed. 5. The end of the module is not connected to the module, the use of the special waterproof cap which we need to support. 6. The standard module cascaded 50PCS, maximal cascaded 100PCS, do not avoid excessive connection, line load current is too large and damaged products. 7. If the module is used outdoors, it is necessary to lock the nut in the terminal in the terminal interface, otherwise it will affect the waterproof effect. 8. Module can not be completely exposed in the outdoor use, touch not electrified, live working, module cut wire, thread cannot be completely naked, must do waterproofing treatment, to prevent electric shock. Note: this product is forbidden to work at the non selected voltage and to ensure that the work is at the selected voltage 50/60HZ Installation diagram: Application: Quality Report:
Ships to United States
US Stock Sample CALCA ProS Instant Warm Peel 23.6in x 32.8ft/60cm x 10m DTF Transfer Film ,Double Sided
Item Code: DTF-FAB-60100-SAMPLE-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: Sample CALCA ProS Instant Warm Peel 23.6in x 32.8ft DTF Transfer
Ships to United States
US Stock Sample CALCA ProS2 Instant Hot Peel 11.8in x 49.2ft/30cm x 15m DTF Transfer Film, Double sided
Item Code: DTF-PROS2-3015S-US
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: Sample CALCA ProS2 Instant Hot Peel 11.8in x 49.2ft DTF Transfer
Ships to United States
Sample-US Stock-High Quality Dismountable Base Adjustable Roll Up Banner Stand (39" W x 86.7" H) (Stand Only)
Item Code: SIGNTIFIC-SUN-50-100-US-SAMPLE
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Customers in Other Countries Please Click Here to Order: http://www.sign-in-china.com/products/3487/high_quality_dismountable_base_adjustable_roll_up_banner_stand_39_quot_w_x_86_7_quot_h_stand_only_.html Includes: • Color selectable base • Adjustable pole • Clip top bar • Double canvas bag Description: This roll up display stand, also known as a retractable banner system, is ready to setup almost immediately. Just flip out the feet, raise the pole, and lift the banner. This retractable banner stands automatically rolls the banner into `the` base for storage and transportation. Feature: It has an easy mounting, due to the patent mechanism of the magnetic attachment. How to take out the graphic from the cassette(for all models): • To push down the "Spring Mechanism Lock" at the right side platic end cover to unlock the spring mechanism. • To roll out the graphic. • To roll out the graphic until you see the lead sheet • Pull out graphic from the slit How to insert the graphic into the cassette(for all models): • Turn the inner roll until you see the red arrow mark to indicate the slit with super magnet • Metal strip of the lead sheet • Insert metal strip into the slit pre-instailed with super maghets • After the :click”sound the metal strip is fully inserted and secured by the super magnets • Push up the “Spring Mechanism Lock” at the right side platic end cover to lock the spring mechanism • Turn knob anti-clockwise to wind up the spring until the graphic is fully rolled back into the cassette Application: This roll up display stand is great for trade shows, expositions, and other promotional events.
Ships to United States
Sample-US Stock-33.5"x 30"- 94.49" Double Sided Telescopic Twist Locking Adjurttable Roll Up Banner Stand
Item Code: SIC-STF-42-33-SLV-US-SAMPLE
The Products in US Stock Only Free Shipping to USA. Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance. Graphic Size: 33.5"x 30"- 94.49" GW: 27lbs/pack(2pcs) Packing Size: 9"x 9"x 38"
Ships to United States
Sample-SMD 2835 Waterproof LED Module (3 LED Chips with Aluminum PCB Injection, White Light, 1W, L71.5 x W13.5 x H6.7mm), DC12V
Item Code: LEDM-JS-ST2W-3-SP
Features: 1. High quality 2835 LEDs 2. Aluminum PCB injection for better outline 3. IP65 perfect for indoor and outdoor 4. Input voltage: DC12V 5. Single module cuttable 6. 160°wide beam angle for uniform lighting 7.Color temperature 6000-7000K 8.1 FT 1.7 modules Application: Back-lit lightbox with thickness of 6-18cm, luminous letter, LOGO etc. Installation: Fix by self adhesive tape or screw. Profile Drawings: Luminous Intensity Distribution Diagram: Average Illumination: Packing: Installation: Installation Reference Model No Bottom Color of Lightbox Surface Material Depth(cm) Illumination (lux) Density pcs/ ㎡ Spacing (X*Y)cm Visual Effects LEDM-JS-ST2W-3 White White Soft Film 6 7980-8950 10*12 10*8 OK 8 6340-6700 10*10 10*10 10 3430-3700 7*7 14*14 12 2290-2570 6*6 16*16 15 1820-2080 5*5 18*18 18 1750-1930 5*5 18*18 Attentions before installation: • Before installation, check that the product parameters are consistent with the requirements (Seeing product specificationsor product labels) • Load voltage, current, power and power supply should be matched with the product. • Follow the instructions of wiring diagram (first connect the load and then the power supply) to avoid short circuit. • Make sure the correct connection of positive and negative poles between products and power supply. Otherwise, the light will not be on. • Make sure the power cord firmly screwed into the terminal and it should not be pulled out by hands. • The terminal should have insulation,waterproof and anti-corrosive treatment. Statements and Recycling: Statements: Repair should be operated by a qualified technician, if the external circuit or main line of this product is damaged. The parameters given in this manual are typical values and for reference only. All illustrations and drawings in this manual are for reference. This product is subject to change without notice. Recycling: LED lighting products belongs to electronic products, please do recycling treatment according to the relevant WEEE directives.
Ships to United States
US Stock, CALCA 23.6" x 98´ Roll White Color 280 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Medium Elasticity Vinyl
Item Code: HTF-300SE-US
Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Medium Elasticity Vinyl US Stock, CALCA 23.6" x 98´ Roll White Color 280 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Medium Elasticity Vinyl Discriptions: CALCA 23.6" x 98´ Roll
Ships to United States
UK Stock CALCA 23.6" x 98´ Roll White Color 280 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Medium Elasticity Vinyl
Item Code: HTF-300SE-UK
The Products in UK Stock Only Free Shipping to UK. Customers in Other Countries Please Click Here to Order: CALCA 23.6" x 98´ Roll White Color 280 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Medium Elasticity Vinyl UK Stock CALCA 23.6" x 98
Ships to United States
US Stock, CALCA 23.6" x 98´ Roll White Color 280 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Medium Elasticity Vinyl(Local Pick-Up)
Item Code: HTF-300SE-PKU-US
Marks: The Products in US Stock, this is the price only for local pick-up. Customers in Other Countries Please Click Here to Order: CALCA 23.6" x 98´ Roll White Color 280 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Medium Elasticity Vinyl US Stock
Ships to United States
CALCA 19.7" x 98´ Roll White Color 270 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric
Item Code: HTF-300SRP
CALCA 19.7" x 98´ Roll White Color 270 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Discriptions: CALCA Heat Transfer Vinyl, with solvent ink, eco-solvent ink to produce images. Due to the use of innovative thermal transfer technology, the hot press
Ships to United States
US Stock, CALCA 19.7" x 98´ Roll White Color 270 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric
Item Code: HTF-300SRP-US
Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric US Stock, CALCA 19.7" x 98´ Roll White Color 270 Micron PU Heat Transfer Vinyl Eco-Solvent Printable Vinyl For Dark T-shirt Fabric Discriptions: CALCA Heat Transfer Vinyl, with solvent ink, eco-solvent ink to produce
Ships to United States
13pcs Window Tint Tool Kit, Car Window Film Tinting Tools Vinyl Wrap Kit, Vinyl Squeegee Film Scrapers For Paint Protection, Decals, Solar Wrap Film
Item Code: BS-KIT-13
5cm (8.9" x 5.7" x 2") Gross Weight: 275g (0.6lbs) Product Details: Feature: 1. A set of professional tool kit for both professional and DIY wrappers. Suitable for application of all types of window tint, decals, signs, wrap film and car vinyl cutting. 2. Durable felt edge squeegee
Ships to United States
71" 180cm Sliding KT Board Cutting Ruler, Paper Trimmer Ruler, Photo Cutter with Ruler
Item Code: CS-KTPT-HL-005
Description: It is a trimmer which combines a ruler and cutter and on which the cutter slides on the ruler for cutting. It can cut thin materials or thicker ones at thickness max 10mm. There are trapezoid blades furnished which can substitute the art cutting blade when it is broke off. Using hook
Ships to United States
Pneumatic Bending Slot Cutting Machine Tools for Metal Channel Letters 5.7"(145mm)
Item Code: CS-HD-BC02-EZ
Description: Pneumatic Clamp Max Thickness of Sheet can be bended: iron 1.0 mm, aluminum: 1.2 mm, stainless steel: 0.8mm, effective flanging height is 145mm. No bounce Packing Size: 500mm x 440mm x 310mm Gross Weight: 27kg/set
Ships to United States
51" x 35" 1390 Laser Engraving and Cutting Machine
Item Code: LCM-BY-Z1390
function and power cut-off function ensure longer working life, safety and effectiveness. – Laminated Safety Glass, glass viewing windows creating a safe enclosure for laser processing. – Adopt the super fine cutting technology, which has features of extensive material processing
Ships to United States
79" 200cm Sliding KT Board Cutting Ruler, Paper Trimmer Ruler, Photo Cutter with Ruler
Item Code: CS-KTPT-HL-006
Description: It is a trimmer which combines a ruler and cutter and on which the cutter slides on the ruler for cutting. It can cut thin materials or thicker ones at thickness max 10mm. There are trapezoid blades furnished which can substitute the art cutting blade when it is broke off. Using hook
Ships to United States
530*420mm Hard Cover Maker (Corner Cutting & Electric Edge Folding)
Item Code: SIC-HY-SK530B
Application: It's used to make hardcover books, cases of hardcovers, albums, photograph album, picture album, etc. Description: The machine includes a position area, corner cutter and electric edge folder. Packing Details: Packing Size: 34.3" x 26.0" x 19.3" (870 x 660 x 490mm) G. W.: 143.3lb (65kg) Detail:
Ships to United States
