Cart 
Order Tracking
4#(10mm)Golden Iron Grommet for Heavy Duty Hand Press Grommet Machine
Item Code: CS-GM-WD-G4
Description: • Iron material. • Inner Diameter: 10mm • Outer Diameter: 19mm • Various colors: Golden • Two parts: grommet and washer • Qty/CTN: 20,000pcs/carton • Applying grommet machine model: CS-MGM-SD, CS-MGM-SD-F1, CS-MGM-SD-F2. • Widely used for flex
Ships to United States
DY20 150W Power supply for RECI W6 / W8 CO2 SealedTube Laser Engraver Cutter Machine, 220V
Item Code: CS-PS-DY20-220V
Mark & model: DY20, small size, quick response, it is suitable for Reci W6 / W8 / S6 / S8 laser tube. Original: Asia and Pacific Area China Quality standard: International H.S. Classification: Machinery & Electronics Electr. Element 8541 Semiconductor devices; light - emitting diodes parts. Warm tips: The power supply is to be used for Reci, EFR and WEEGIANT laser tube. If you want to make it work on other brands, please check the specification before order. Features: This power sourcesupply adopts thin type design. The shape of this power supply / power source is thin which is specially designed for special laser tube. The power sourcesupply makes laser tube output larger and more stable. Quick Response: It can enlarge laser power and prolong laser tube‘s service life. Easy Control: The start and stop of laser can be easily controlled by TTL level. This power supply / power source has output open circuit protection. This power supply / power source has TTL signal indication, water through signal indication and laser output indication. This power supply / power source has the BUTTON to test it work properly. Application: Sculpture and cut acrylic, fabric, double color sheet and rubber, etc We stick the protection film on the power source to prevent the metal parts of the scrape! I. Instruction for sub - connection wire of the control end 1) Footer 1 is 5V power supply / power source. (Not needed when connecting the cardinal plate. It is used when regulating the power with potentiometer and the 5V current should be less than 10 mA. 2) TH. TL refers to high and low power level respectively, and WP refers to water protection. 3) Footer 5 G refers to ground and 6 refers to input end. 4) When connecting the control plate, connect the light signal with footer 2 in the case of high power level light-emitting, (footer 3 for low power level light-emitting), connect the ground-wire with footer 5, connect footer 6 with power control analog signal, and make short circuit for footer 4 and 5. 5) PWM can also be used in footer 6, but the pulse peak is required to reach 5V, and the frequency should be above 20K. 6) For testing: 3, 4 and 5 are in short circuit (or 4, 5 are in short circuit and 3, 5 are connected to switch), the potentiometer center is connected with 6 IN, and the two other ends are connected to 5V and ground (1 and 5) respectively. 7) The high power level controls the light, 1 and 2 are connected, and 4 and 5 are in water protection. 8) It is not proposed to control laser power with high-frequency modulation, because it will have impact on the service life of the laser. 9) The model is applicable to Z2 laser, it is necessary to regulate and use the current according to the laser instructions. 10) The ammeter is concatenated to the cathode line. II. Instruction for power wire Note: The table 10A refers to the connection wire requirement, but not the actual power dissipation. III. Instruction for laser connection wire 1) The positive red - line with high voltage is connected to the laser tail 2) The negative white - line is connected to laser output window IV. Current limitation To limit the working current, the potentiometer (Lies in the underside of the power supply / power source should be rotated in counterclockwise (Please refer to the schematic diagram in our website). Limit the maximum output current as it is regulated in the operating instruction. The working current should be limited before delivery. V. Linear scale between input signal and the output current Turn around the potentiometer; the linear scale will be changed: for example, when the input signal is 0 - 5V, the output current is 0 - 32mA.Or when the input signals 0 - 2V, the output signal is 0 - 32mA. Note: When the potentiometer is turned down too much, the real output current will be brought down by the same input signal. VI. Using current The use standard for our power supply / power source is under 220V, 50Hz. The fluctuation of the input voltage and frequency will affect the working current provided by the power supply / power source, the impact is linear relative. The unstable of the input voltage will affect the output power of the laser tube. The fluctuation of the input voltage has no impact on the lifespan of the laser if only the current provided by the power supply / power source is not over the current limitation. Quality Report:
Ships to United States
EFR F8 150W CO2 Sealed Laser Tube 1850mmL for Laser Engraving Machine
Item Code: CS-LT-F8-150W
. The laser output is stable. The discharge tube is catalyst coated, the working life is much increased. Compared to similar product, the tube body length is shorter, the laser beam mode is better, the cutting speed is higher. • Stability: The discharge glass tube body is imported from Germany
Ships to United States
11mm Silver Metal Eyelets Grommets Sawtooth Grommets for 360 Degree Single Ring Grommet Machine
Item Code: CS-GM-ZG-WXG
Description: • Iron material. • Inner Diameter: 11mm • Quantity/Parcel: 1700pcs • Various colors: Silver • Applying grommet machine model:CS-MGM-ZG-WX. • Package size: 235mm x 180mm x 115mm (9.3" x 7.1" x 4.5") • Gross Weight: 900g (2lb
Ships to United States
Reci Low Laser Tube Holder Support Mount for 80mm Diameter Laser Tube of CO2 Laser Machine
Item Code: CS-RC-L
between the cross section center of laser tube in horizontal direction and the ground is about 80mm-90mm. Tips: • A piece of laser tube should be equipped with two tube frames. • Sigle head laser engraving cutting machine matchs with 2 pcs high laser tube frame. • Double heads
Ships to United States
5#(12mm)Golden Iron Grommet for Heavy Duty Hand Press Grommet Machine
Item Code: CS-GM-WD-G5
Description: • Iron material. • Inner Diameter: 12mm • Outer Diameter: 22mm • Various colors: Golden • Two parts: grommet and washer • Qty/CTN: 20,000pcs/carton • Applying grommet machine model: CS-MGM-SD, CS-MGM-SD-F1, CS-MGM-SD-F2. • Widely used for flex
Ships to United States
Rotary Axis Attachment, 3-Jaws Chuck Rotary for CO2 Laser Engraving Machine (X700)
Item Code: CS-LM-RT02
Rotary Axis Attachment, 3-Jaws Chuck Rotary for CO2 Laser Engraving Machine Adjustable 3-Jaw Precision Precision marking and engraving cylindrical objects. Laser process small pens, mugs, tumblers, flashlights and much more. Used for X700 Laser Engraver, 2 phase rotary axis stepper drives
Ships to United States
Reci High Laser Tube Holder Support Mount for 80mm Diameter Laser Tube of CO2 Laser Machine
Item Code: CS-RC-H
section center of laser tube in horizontal direction and the ground is about 120mm-170mm. Tips: • A piece of laser tube should be equipped with two tube frames. • Sigle head laser engraving cutting machine matchs with 2 pcs high laser tube frame. • Double heads laser engraving
Ships to United States
White USB Dongle KEY/Softdog for Leetro MPC6535/MPC6525/MPC6565/CO2 Laser Machine
Item Code: CS-LC-W35
Laser Machine White USB Dongle/USB KEY for Leetro MPC6515,MPC6525,MPC6535 Color: white Package: carton box HS code: 8466939000 Usage: Leetro MPC6515/6525/MPC6535/6565 controller(lasercut software)
Ships to United States
Ving 800W 150L Portable Acrylic Polishing Machine, Oxygen Hydrogen Flame Generator, 2 Gas Torches free, 220V
Item Code: APM-H260-220V
Note: Please clean the new machine when using it for the first time. Cleaning method: put the electrolyte into the machine, take out the electrolyte after running for 3-5 hours, and then add the electrolyte again. 800W Portable Oxygen Hydrogen Flame Generator Acrylic Polishing Machine, 150L 2 Gas
Ships to United States
13mm Inner Diameter Silver Iron Grommet Eyelets for Automatic Grommet Machine
Item Code: CS-GM-ST13IRON
Description: Inner Diameter: 13mm Outer Diameter: 21.5mm Package: 1000pcs/bag, 10bags/carton Various colors: Silver Iron material Applying Grommet Machine model: CS-AGM-ST13 Mould machine can change the corresponding to the other. Warm Tips: This Grommets can not apply to other models except the
Ships to United States
1M Length 3D Vacuum Sublimation Heat Press Machine Rubber Seal Strip
Item Code: CS-3D-08
Description: The rubber seal strip is 1m which is specially used for 3D vaccum heat transfer machine. It is used for the 3D heat transfer machine which model is HTM-AHP-3D/HTM-AHP-3D-S.
Ships to United States
39" x 47" Sponge Mat for Large Format Heat Press Machine
Item Code: HTM-HMD-01
Description: The 39" x 47" sponge mat for Large Format Heat Press Machine is specially used for heat transfer machine which model is HTM-LCB4-III-LF, HTM-SH10120, HTM-SH10120-US Product Size: 100 x 120 x 3 cm Package Size: 110 x 130 x10 cm Product Weight: 15kg
Ships to United States
US Stock, Ving Multifunction Automatic CNC Channel Letter Bending Machine(with notching and flanging function)
Item Code: MBM-BENDER-CLASSIC-US
Remark: The air pump is not included, please prepare it by yourself.The air pump should be above 0.6Mpa. Automatic Multi-functional CNC Metal Channel Letter Bending Machine BENDER CLASSIC CNC metal channel letter bender is the machine with full function: auto feeding, auto notching, auto flanging
Ships to United States
Senfeng 130W Laser Power Supply for CO2 Laser Engraving Machine, 220V
Item Code: CS-PS-SF130W-220V
Description: Laser power supply 130W spare parts for laser machines, mainly for Senfeng Laser engraving machine. Category: Laser Power Supply Model: 130W Input Voltage: 220V Output Current: 38m(A) Output Voltage: 50k(V) Output Power: 130W Specification: Model CS-PS-SF130W-220V AC Input
Ships to United States
Ving Parts Universal Oxyhydrogen Gas Torch Flame Gun with 3 Nozzles for HHO Polishing Welding Machine
Item Code: CS-HG-FG-I
Universal Oxyhydrogen Gas Torch Flame Gun with 3 Nozzles for HHO Polishing Welding Machine Oxyhydrogen gas torch flame gun for 75-95L/H gas flow Description: This oxyhydrogen gas torch flame gun is used for all the brands of torch polishers for acrylic polishing. Specification: Speed Adjustment
Ships to United States
31" x 39" (80 x 100cm) Sponge Mat for Large Format Heat Press Machine
Item Code: HTM-HMD-02
Description: The 31" x 39" (80 x 100cm) sponge mat for Large Format heat press machine is specially used for heat transfer machine which model is HTM-MHP01-III-N-220V-US，HTM-LCB5-III-US, HTM-DG-MC, HTM-DG-MC-US, HTM-GS-QDD, HTM-GS-QDD-US Product Size: 80 x 100 x 2 cm Package Size: 85 x
Ships to United States
Ving 400W YAG Laser Welding Machine for Fine Metal Channel Letter Making
Item Code: LWM-WY400HZ
Description: 400W Standard YAG Laser Welding Machine for Fine Metal Channel Letter Making With CCD camera, Gold-plated focusing cavity, laser head can 360 degree rotate. With CE certificate, 2-year warranty. The 400W YAG laser welding machine is mainly used for welding several of metal letters LED
Ships to United States
94"(2400mm) Quartz Heater Tube for Auto Acrylic bender Bending Machine
Item Code: ABM-HT-2400A
94"(2400mm) Quartz Heater Tube for Automatic Acrylic Plastic PVC Bending Machine This Quartz Heater tube is One replacement of Bending Machine, also it is a consumable. This Quartz Heater tube is Only used with ZD and JW series. Specifications Model: ABM-HT-2400A Diameter: 18mm Length
Ships to United States
1000pcs 58mm Blank Pin Badge Button Supplies for Badge Maker Machine
Item Code: CS-CO-58
Description: Round size: 1-3/10" (58mm) Upper-shell: Chrome Bottom-shell: ABS mylar disc/ Iron Metal Bottom The component contains: Upper-shell, Down-shell, Film, Pin Qty/CTN: 1000pcs The item contains: Upper-shell: 1000pcs Down-shell ABS / Iron Metal: 1000pcs Film: 1000 pcs Pin: 1000 pcs
Ships to United States
16" x 20" Fully Auto Electric T-Shirt Heat Press Sublimation Transfer Machine
Item Code: HTM-CK101
Sublimation Transfer Machine is widely used for transfer image for T shirts, cloth, mouse pads, rock photos, tiles, backpack school bag, wallet bag, etc.
Ships to United States
18.5W Water Pump for Small CO2 Laser Engraving Machine, 220V
Item Code: CS-HX-6520
Features: • Adopts super-quality ABS original particles to shape the case, which is never wear out. • Adopts strong sucker to fix pump intensively, which is never chapped. Used For: Cooling laser tube of laser engraving cutting machine, spindle motor of cnc engraver router and
Ships to United States
48"(1200mm) Quartz Heater Tube for Auto Acrylic Bender Bending Machine
Item Code: ABM-HT-1200A
48"(1200mm) Quartz Heater Tube for Automatic Acrylic Plastic PVC Bending Machine This Quartz Heater tube is One replacement of Bending Machine, also it is a consumable. This Quartz Heater tube is Only used with ZD and JW series. Specifications Model: ABM-HT-1200A Diameter: 18mm Length
Ships to United States
M52 F-Theta 1064 Scan Lens 110 / 150 / 175 / 200mm Area for Fiber Laser Marking Machine
Item Code: CS-LENS-1064-S
F-Theta Scan Lens is widely applied for taking advantage of galvanometer scanning. ND: YAG, Green ray and U-YAG scan system. It is widely used in drilling and marking area. Details: Product name: F-Theta lens Application: Laser Marking Laser type: Fiber Laser etc. Wavelength: 1064nm Scan field: 110 x 110mm(4.3in x 4.3in) / 150 x 150mm(5.9in x 5.9in) / 175 x 175mm(6.9in x 6.9in) / 200 x 200mm(7.9in x 7.9in) Thread: M52 Color: Black Packaging: 1 pc / carton for F-Theta lens CS-LENS-1064-S Scan field(mm) Wave Length(mm) Focal Length(mm) Thread(mm) 110 x 110 1064 164 M52 150 x 150 1064 213 M52 175 x 175 1064 254 M52 200 x 200 1064 300 M52
Ships to United States
