Supply sublimation blanks casos m veis\' at wholesalepirce - $145.24

Semi-Automatic Business Card Cutter (90 x 54mm)

Item Code: CS-SSB-001

Description: This semi-automatic business card cutter is used for cutting business card. It’s durable for the steel blade and the blade could be milled by itself to ensure it will be sharp. This cutter cut business card and photo without rough edges because of its reasonable mechanical structure. This business card cutter can also cut laminated card or photo. It’s with multi-adjustment with nice out appearance and the cutter is very smart that's easy to take and operate. Warm Tips: 1. Please make sure the cutter is power off and unplug the power plug first when you clean the machine. 2. Test it before using if the business card cutter does not work for a long time. 3. Make sure the business card is aligned with the blade and tighten the screw of the cutter. 4. Don't put your hands under the blade when the machine is running. 5. Please operate under the operation manual strictly. 1. See-through window 9. Feed tension 1 2. Housing 10. Adjustable paper feed knob 2 3. Push mark 11. Paper margin adjustment knob 4. Receptacle 12. Feed tension 2 5. Pass through No. 2 13. Adjustable paper feed knob 1 6. Switch 14. Arrow mark 2 7. Arrow mark 1 15. Warning Mark 8. Pass through No. 1 Item Semi-auto Business Card Cutter Hand Press Card Cutter Feature Automatic type, it’s easy and convenient to operate that is power saving. Manual type, it’s exhausting to operate. High Efficient 30-40pcs/minute 10-20pcs/minute Durable It adopts aluminum alloy blade which is durable with long life-span. Short life time 1. Prepare the business card cutter and then plug the power plug. 2. Insert the card paper along the fixed feed tesion1 to the feed table in pass through No.2. 3. Adjust the adjustable paper feed knob 1 beneath the housing to ensure the center line in your content must be centered to the arriow mark 1. 4. Adjust paper margin adjustable knob on the left side to lock the card paper in the proper position, then switch on to bring out the semi finished cards and switch off when all first pass completed. 5. Insert the semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1. 6. Semi finished content must be put along the stop knob on the right side closely by adjustment of adjustable paper feed knob 2 and make sure the arrow mark 2 precisely points at the third broken line in the card paper through see-through window. 7. Power on again followed by pressing “the push mark” with two thumbs forward evenly to see semi finished cards along the fixed feed tension 2 into the feed table in pass through No. 1 from see-through window then power off when all finished. 8. Open the lid to clear wastepaper or the content stuck in the blade after all works completed but be sure the machine is powered off. The business card cutter is widely used for cutting business card, photo and picture card, etc. Quality Report:

Photo and card cutter >>

$127.81 - 145.24/set

Ships to United States

Item Code: CS-SSB-001

Item Code: SIC-HY-SKJ950C

Item Code: SIC-CT-1-34

Item Code: RS-BS-TM5100-HRS

Item Code: CS-CA-1-US-10PC

Item Code: SFS-XGSH-100PC-US

Item Code: SFS-XGSH-100PC-PKU-US

Item Code: CS-CA-1-PKU-US-10PC

Item Code: CS-MKD-CO-3H-100PC

Item Code: CS-MKD-CO-3H-US-100PC

Item Code: CS-MKD-CO-3H-PKU-US-100PC

Item Code: HTP-DB-POUCH-10PC

Item Code: CS-MKD-CO-3R-100PC

Item Code: CS-ST-SH04-15PC

Item Code: CS-MKD-CO-3R-US-100PC

Item Code: CS-MKD-CO-3R-PKU-US-100PC

Item Code: HTB-NY-SH-15PC

Item Code: HTPC-DB-016-US-50PC

Item Code: HTPC-DB-016-PKU-US-50PC