
The Products in UK Stock Only Free Shipping to UK.
Customers in Other Countries Please Click Here to Order:
25pcs 20oz Matte Taperless Sublimation Blank Skinny Tumbler Stainless Steel Insulated Water Bottle Double Wall Vacuum Travel Cup With Sealed Lid and Straw (White)
Descriptions:
It's ready for sublimation print by tumbler heat press machine or sublimation oven,the print color come out bright not foggy. Our sublimation skinny tumbler is completely straight not tapered, which is easy to make the full wrap sublimation print by mug tumbler press machine or sublimation oven.

Specifications:
Material: 304-18/8 food grade stainless steel
Surface Finishing: Spray paint + sublimation coating
Color: White
Capacity: 20oz (590ml)
Lid material: ABS
Product Dimensions:
Height (including lid): 21cm (8.3in)
Lower Diameter: 7.1cm (2.8in)
Hot / Cold: Hot & Cold
Quantity: 10pcs / carton
Weight: 3.8kgs (8.36lbs) /carton
Dimension: 41cm x 27cm x 17cm (16.1in x 10.6in x 6.7in) / carton
Note:
1. Please allow 1-3mm tolerance due to manual measurement.
2. In order to make the tumbler cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible.

Usages:
1) Note: Be sure to remove lid before sublimating!
mug press Machine Settings:
Press Temperature: 180℃ (356℉)
Time: 60 Seconds
Pressure: Medium
Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
Place tumbler in press at the press temperature, and close the element around the tumbler
Press for the specified time above needed using specified pressure
If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
Once done, remove the tumbler from the press and remove the transfer paper immediately
Allow the tumbler to cool completely before use
2) Oven Settings
Temperature: 165~170℃ (329℉~338℉)
Time: 6 - 7 Minutes
(Test in your oven for accurate time)
Attach reversed printed image to tumbler with thermal tape
Place tumbler in heat shrink bag or silicone wrap Set the convection oven at 165~170℃ (329℉~338℉) for 6 minutes. (Test to determine best timing!)
Afterwards, remove heat shrink bag / silicone wrap and paper immediately
Allow the tumbler to cool completely before use. Caution: Tumbler is extremely hot when in the mug press, do not handle with bare hands.

Warm Tips:
1.It is normal for the machine to have gaps, so that there will be pressure.
2.The taperless tumbler can do the full print. We suggest change the position of tumbler and press again to avoid bad print.
Applications:
DIY: The surface of the cup can be designed according to your preferences, sublimation, laser engraving, embossed logo, silkscreen printing, heat transfer printing, etc.
Design for all kinds of hot and cold beverages, our 20oz capacity wine tumbler is suitable for any indoor or outdoor places. Fit for enjoying drinks at home, on the beach, by the lake, at the pool, in the office, at the party, cabin trip, camping etc.


Suggested Transfer Instructions:


seller assumes all responsibility for this listing
Ship from where?
 |
We have 4 overseas warehouses all over the world now including: Russia, USA, Brazil and Mexico. and We are setting up another one in Europe. Normally, we will ship your order from the nearest warehouse to you. if the stock near you is sold out, we will ship your order to you directly from china. |
Return policy
 |
Purchases can be returned under the following conditions:
1) There are quality problems after opening the package.
2) Products are different than on the order list.
3) Products are irreparably damaged during transportation.
|
Payment details
Payment method |
 |
1.Paypal (online payment)
2.Creidit card
3.Bank Transfer (T/T)
4.Western Union online/offline payment
|